TEAC X-01 Service Manual

TEAC X-01 Service Manual
0 Rating(s)
Read reviews

Service Manual for TEAC X-01, downloadable as a PDF file.

We also have owner's manual to this model.

Manual details

Immediate download after payment.
Delivered as a PDF file.
The manual has 41 pages
File size: 6.68 MB
Available language versions: English
Different language versions may vary sligthly in file size and page count.

We guarantee that...

our manuals are complete,
the manual includes circuit diagrams,
our manuals are checked with antivirus,
We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

X--0

011

SERVICE MANUAL

SUPER AUDIO CD PLAYER

Effective : September, 2004 8C0365

S-0128A

NOTES

PC boards shown are viewed from parts side.

The parts with no reference number or no parts number in the

exploded views are not supplied.

As regards the resistors and capacitors, refer to the circuit diagrams

contained in this manual.

Parts marked with this sign are safety critical components. They

must be replaced with identical components - refer to the appropriate

parts list and ensure exact replacement.

CONTENTS

1 SPECIFICATIONS

2 ADJUSTMENTS

3 EXPLODED VIEWS AND PARTS LIST

4 PC BOARDS AND PARTS LIST

5 INCLUDED ACCESSORIES

For U.S.A.

X--0

011

SERVICE MANUAL

SUPER AUDIO CD PLAYER

Effective : September, 2004 8C0365

S-0128A

NOTES

PC boards shown are viewed from parts side.

The parts with no reference number or no parts number in the

exploded views are not supplied.

As regards the resistors and capacitors, refer to the circuit diagrams

contained in this manual.

Parts marked with this sign are safety critical components. They

must be replaced with identical components - refer to the appropriate

parts list and ensure exact replacement.

CONTENTS

1 SPECIFICATIONS

2 ADJUSTMENTS

3 EXPLODED VIEWS AND PARTS LIST

4 PC BOARDS AND PARTS LIST

5 INCLUDED ACCESSORIES

For U.S.A.

1 SPECIFICATIONS

General

System ......................................................................SACD and CD

Power supply ........................................................AC 120 V, 60 Hz

Power consumption ..............................................................40 W

Weight................................................................25 kg (55-1/16 lb)

External dimensions (W x H x D) ..................442 x 153 x 353 mm

(17-3/8" x 6" x 13-7/8")

Operating temperature ................................................+5°C - +35°C

Operating humidity..........................5% to 85% (no condensation)

Storage temperature ................................................20°C - +55°C

Audio output (Analog Audio)

Jacks ......................................................XLR jacks (2 channel) x 1

RCA jacks (5.1 channel) x 1

Maximum Output level (1 kHz, full scale) ..............2.5 Vrms (RCA)

2.3 Vrms (XLR)

Nominal Output level (1 kHz, full scale 20dB) ..250 mVrms (RCA)

230 mVrms (XLR)

Frequency response ......................................5Hz - 58 kHz (SACD)

Signal-to-Noise Ratio (S/N)..........................112 dB (SACD, 1 kHz)

Dynamic range ............................................106 dB (SACD, 1 kHz)

Total harmonic distortion............................0.001% (SACD, 1 kHz)

Audio output (Digital Audio)

OPTICAL ..........................Optical digital jack x 1, 15 to 21 dBm

COAXIAL ............................................RCA jack x 1, 0.5 Vp-p/75

Word Synchronization input format

Jack ........................................................................................BNC

Input level ................................................................4.5 Vp-p/75

The main unit can accept and synchronize to the following

frequencies received from external devices:

44.1kHz, 88.2kHz, 176.4kHz

Accessories

Power cord x 1

Remote Control Unit (RC-941) x 1

Batteries (AA, R6, SUM-3) x 2

Screwdriver x 1

Felt x 3

Warranty card x 1

Owner's manual x 1

· Design and specifications are subject to change without notice.

· Weight and dimensions are approximate.

2 ADJUSTMENTS

2-1 Sled Offset Adjustment

1. Connect the probe of oscilloscope to pin 1 (SLCNT) of P205 on

CORE PCB, and the probe earth to pin 2 (SL18V).

2. Set the oscilloscope's voltage range to DC100mV, and the time

calibration to 10mS.

3. Adjust potentiometer R232 for a potential difference of 0V

between pins 1 and 2.

2-2 Sled Gain Adjustment

1. Connect the probe of oscilloscope to pin 3 (H1OUT) of P205 on

CORE PCB, and the probe earth to pin 2 (SL18V).

2. Set the oscilloscope's voltage range to AC200mV, and the time

calibration to 10mS.

3. Press the DF range button on RC-668 (P/No. E00380000A), a

remote controller for VRDS-8, to activate the sled, and adjust

potentiometer R235 for a sine wave output of 1Vp-p at pin 3.

Pressing the DF range button again beings the unit back to the

normal mode.

R232

R235

CORE PCB

P205 (Bottom Side)

SAFETY INFORMATION

This product has been designed and manufactured according to FDA

regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation

Control for Health and Safety Act of 1968", and is classified as a class 1

laser product. There is no hazardous invisible laser radiation during

operation because invisible laser radiation emitted inside of this product

is completely confined in the protective housings.

The label required in this regulation is shown 1.

OCAUTION

USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

Optical pickup:

Type

: GH20707A2A

Manufacturer

: SHARP CORPORATION

Laser output

: Less than 1mW on the objective lens

Wavelength

: 788±5 nm (CD)

1 For U.S.A.

3 EXPLODED VIEWS AND PARTS LIST

EXPLODED VIEW-1

(

)

£ £

;

EXPLODED VIEW-1

Reviews

There are no reviews of this manual yet.

Related Products