TEAC P-70 Service Manual

Cover page of TEAC P-70 Service Manual

Service Manual for TEAC P-70, downloadable as a PDF file.

We also have owner's manual to this model.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 31 pages
  • File size: 2.67 MB
  • Available language versions: English
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • the manual includes circuit diagrams,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
P
P--7
70
0
SERVICE MANUAL
CD Drive Unit
Effective : September, 2002
S-0076A
CONTENTS
1 SPECIFICATIONS
2
2 ADJUSTMENTS AND CHECKS
3
3 EXPLODED VIEWS AND PARTS LIST
4
4 PC BOARDS AND PARTS LIST
12
5 INCLUDED ACCESSORIES
23
NOTES
PC boards shown are viewed from parts side.
Parts marked with * require longer delivery time.
The parts with no reference number or no parts number in the
exploded views are not supplied.
As regards the resistors and capacitors, refer to the circuit diagrams
contained in this manual.
£
Parts marked with this sign are safety critical components. They
must be replaced with identical components - refer to the appropriate
parts list and ensure exact replacement.
Parts of [ ] mark can be used only with the version designated.
background image
P
P--7
70
0
SERVICE MANUAL
CD Drive Unit
Effective : September, 2002
S-0076A
CONTENTS
1 SPECIFICATIONS
2
2 ADJUSTMENTS AND CHECKS
3
3 EXPLODED VIEWS AND PARTS LIST
4
4 PC BOARDS AND PARTS LIST
12
5 INCLUDED ACCESSORIES
23
NOTES
PC boards shown are viewed from parts side.
Parts marked with * require longer delivery time.
The parts with no reference number or no parts number in the
exploded views are not supplied.
As regards the resistors and capacitors, refer to the circuit diagrams
contained in this manual.
£
Parts marked with this sign are safety critical components. They
must be replaced with identical components - refer to the appropriate
parts list and ensure exact replacement.
Parts of [ ] mark can be used only with the version designated.
background image
1 SPECIFICATIONS
2
Pickup
Drive method ......................................................linear motor drive
Type ................................objective lens drive, optical three beams
Lens drive method ..........................two-dimensional parallel drive
Light source....................................................semiconductor laser
Wavelength ..........................................................................780nm
Digital output formats
Base sampling frequency ..................................................44.1kHz
Frequency precision ..................±50PPM (indication: ±1.000PPM)
Quantization bits ..........................................16 bits linear/channel
Transfer rate..............................................................3.072Mb/sec.
A type modulation..................................biphase, mark modulation
Base sampling frequency ..................................................88.2kHz
Frequency precision ..................±50PPM (indication: ±1.000PPM)
Quantization bits ..........................................24 bits linear/channel
Transfer rate..............................................................6.144Mb/sec.
A type modulation..................................biphase, mark modulation
Base sampling frequency ................................................176.4kHz
Frequency precision ..................±50PPM (indication: ±1.000PPM)
Quantization bits ..........................................24 bits linear/channel
Transfer rate........................................6.144Mb/sec. (double wire)
A type modulation..................................biphase, mark modulation
Digital output terminals
RCA (COAXIAL) ....................................................0.5Vp-p/75 ohm
XLR (BALANCED)................................................4.5Vp-p/110 ohm
OPTICAL(TOS) .................................................... ­12.5 ~ ­16dBm
Word synchronization input format
BNC ......................44.1kHz, 88.2kHz rectangular 4.5Vp-p/75 ohm
General
Power supply ................................AC 230V, 50Hz (Europe model)
AC 120V, 60Hz (U.S.A./Canada model)
AC 220V, 60Hz (Korea model)
Power consumption ................................................................25W
Dimension (WxHxD)....................................465 x 162 x 355 (mm)
Weight..........................................................................about 25 kg
Remote control unit
Type ..............................................................infrared pulse system
Battery ............................................DC3V (AA battery, SUM-3 x 2)
Dimensions (WxHxD) ......................................57 x 21x 216 (mm)
Weight..........................................about 320g (including batteries)
Accessories included with the player
Remote control unit x 1, Batteries (AA, SUM-3) x 2,
Power cord x 1, felt sheet x 3,
Metal tool for releasing and securing the anti-vibration clamp x 1,
Warranty card x 1, Owner's Manual x 1
Improvements may result in specification or feature changes
without notice.
SAFETY INFORMATION
This product has been designed and manufactured according to FDA
regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation
Control for Health and Safety Act of 1968", and is classified as a class 1
laser product. There is no hazardous invisible laser radiation during
operation because invisible laser radiation emitted inside of this product
is completely confined in the protective housings.
The label required in this regulation is shown 1.
OCAUTION
USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
Optical pickup:
Type
: KSS-151A
Manufacturer
: SONY Corporation
Laser output
: Less than 0.2 mW on the objective lens
Wavelength
: 760 - 800 nm
1 For U.S.A.
background image
2-1-2 Objective
Never look directly into the LD or observe the laser beam
through another lens or mirror.
Don't touch the objective with fingers.
If objective becomes dirty, playback will deteriorate.
To clean the objective, moisten a good cleaning tissue, such as
made by KODAK, in isopropyl alcohol and wipe the objective
gently. Wipe off and excess fluid with a dry cleaning tissue.
2-2 Sled balance adjustment
1. Adjust V403 for 0V potential between P415 pin 1 (SO) and pin
2 (GND).
2-1 Replacement of the Pickup Assembly
2-1-1 Cautions in handling
Before removing the pickup assembly be sure to solder-bridge
where indicated in the inset to prevent the laser diode from
being electrostatically damaged. After replacing the pickup
assembly, be sure to unsolder the antistatic bridge. Or else the
laser diode does not function.
Before servicing the pickup assembly be sure to prevent
electrostatic-inducer destruction by grounding not only test
equipment in use but also yourself.
In case of mounting and dismounting the assembly, do not
touch the actuator, photosensor and LD plate.
Don't touch the plated portion of the flat cable end directly with
fingers.
Use care not to break the flat cable.
Soldering must be done quickly at less than 30W, 320 .
Don't disassemble the pickup ass'y.
Don't apply shock to the pickup ass'y.
Don't place the assembly in a place subject to excessive dust,
heat or moisture.
2 ADJUSTMENTS AND CHECKS
3
The pickup is secured with an anti-vibration clamp in order to
reduce vibration during transport. This must be released
before use.
Releasing the anti-vibration clamp
1. Place the unit on its side, left side down, as shown here.
2. Use the supplied tool and insert it into the hole on the bottom.
3. Turn the tool about 30 degrees counter-clockwise in the
FREE direction.
Securing the anti-vibration clamp
1. Remove any disc from the unit, disconnect the power, and
place the unit on its side, left side down, as shown here.
2. Use the supplied tool and insert it into the hole on the bottom.
3. Turn the tool about 30 degrees clockwise in the LOCK
direction.
NOTE:
You do not need to use force
to clamp and unclamp the
unit. This may damage the
unit. Use only the supplied
tool and turn gently.
SERVO PCB
V403
P415
1
8
background image
3 EXPLODED VIEWS AND PARTS LIST
EXPLODED VIEW-1
4
1
2
2
3
3
4
5
6
6
7
8
8
9
9
0
0
q
w
e
e
r
t
y
u
i
o
p
a
s
d
f
g
h
j
k
l
;
z
x
c
v
n
!
!
@
@
@
@
#
#
#
$
$
#
#
#
#
#
^
^
&
&
%
%
*
*
*
*
m
(
b
)
background image
5
EXPLODED VIEW-1

Reviews

There are no reviews of this manual yet.