3-beam, semiconductor laser
1 bit DAC
20 Hz ~ 20 kHz ±1.5dB
Total Harmonic Distortion:
< 0.09 % (1 kHz)
Signal-to-Noise Ratio (S/N):
>85 dB (1 kHz)
>80 dB (1 kHz)
Analog; 2.0 Vrms (RCA)
Wow and Flutter:
Below measurable limit
120 V AC, 60Hz (U.S.A./Canada Model)
230 V AC, 50Hz (Europe/U.K. Model)
12 Watts (AC)
Dimensions (W x H x D):
435 x 104 x 295mm
Wireless Remote Control Unit (RC-853)
RCA pin-plug cord
Battery (SUM-3, "AA", "R6" type) x 2 (Europe/U.K. Model)
· Design and specifications are subject to change without notice.
This product has been designed and manufactured according to FDA
regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation
Control for Health and Safety Act of 1968", and is classified as a class 1
laser product. There is no hazardous invisible laser radiation during
operation because invisible laser radiation emitted inside of this product
is completely confined in the protective housings.
The label required in this regulation is shown 1.
USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
MANUFACTURER : Sanyo Electric Co., Ltd.
: Continuous Wave max. 5mW
1 For U.S.A.