Owner's Manual for ONKYO DX-7333

Contents

Before using

Important Safeguards........................ 2

Precautions ....................................... 3

Features............................................. 4

Supplied accessories......................... 4

Before operating this unit ................. 5

Connecting other components .......... 6

Operation

Playing CDs...................................... 7

Using the memory function ............ 10

Useful Functions............................. 12

Other informations

Control positions and names .......... 14

Precautions for handling

the Compact Disc (CD) ............... 15

Troubleshooting Guide................... 16

Specifications ................................. 16

Compact Disc Player

DX-7333

Instruction Manual

Thank you for purchasing the Onkyo CD player.

Please read this manual thoroughly before making

connections and plugging in the unit.

Following the instructions in this manual will enable

you to obtain optimum performance and listening

enjoyment from your new CD player.

Please retain this manual for future reference.

2

Important Safeguards

1. Read Instructions All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions The safety and operating instructions

should be retained for future reference.

3. Heed Warnings All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions All operating and use instructions

should be followed.

5. Water and Moisture The appliance should not be used near

water for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, and

the like.

6. Carts and Stands The appliance should be used only with a

cart or stand that is recom-

mended by the manufacturer.

6A. An appliance and cart combi-

nation should be moved with

care. Quick stops, excessive

force, and uneven surfaces may

cause the appliance and cart

combination to overturn.

7. Wall or Ceiling Mounting The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

8. Ventilation The appliance should be situated so that its loca-

tion or position does not interfere with its proper ventilation.

For example, the appliance should not be situated on a bed,

sofa, rug, or similar surface that may block the ventilation

openings; or if placed in a built-in installation, such as a book-

case or cabinet that may impede the flow of air through the

ventilation openings, there should be free space of at least 5 cm

(2 in.) and an opening behind the appliance.

9. Heat The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other appli-

ances (including amplifiers) that produce heat.

10. Power Sources The appliance should be connected to a

power supply only of the type described in the operating

instructions or as marked on the appliance.

11. Polarization If the appliance is provided with a polarized plug

having one blade wider than the other, please read the following

information:

The polarization of the plug is a safety feature. The polarized plug

will only fit the outlet one way. If the plug does not fit fully into the

outlet, try reversing it. If there is still trouble, the user should seek

the services of a qualified electrician. Under no circumstances

should the user attempt to defeat the polarization of the plug.

12. Power-Cord Protection Power-supply cords should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them, especially near plugs, con-

venience receptacles, and the point where they exit from the

appliance.

13. Cleaning The appliance should be cleaned only as recom-

mended by the manufacturer.

14. Nonuse Periods The power cord of the appliance should be

unplugged from the outlet when left unused for a long period

of time.

15. Object and Liquid Entry Care should be taken so that

objects do not fall and liquids are not spilled into the enclosure

through openings.

16. Damage Requiring Service The appliance should be ser-

viced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Servicing The user should not attempt to service the appliance

beyond that described in the operating instructions. All other ser-

vicing should be referred to qualified service personnel.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS

OUVRIR

AVIS

PORTABLE CART WARNING

S3125A

This label on the rear panel states that:

1. This unit is a CLASS 1 LASER PRODUCT and employs a

laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the

cover. Refer servicing to qualified personnel.

"CLASS 1 LASER

PRODUCT "

This unit contains a semiconductor laser system and is classified

as a "CLASS 1 LASER PRODUCT". So, to use this model prop-

erly, read this Instruction Manual carefully. In case of any trou-

ble, please contact the store where you purchased the unit. To

prevent being exposed to the laser beam, do not try to open the

enclosure.

DANGER:

INVISIBLE LASER RADIATION WHEN OPEN AND INTER-

LOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE

TO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS

OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

3

Precautions

1. Warranty Claim

You can find the serial number on the rear panel of this unit. In case

of warranty claim, please report this number.

2. Recording Copyright

Recording of copyrighted material for other than personal use is

illegal without permission of the copyright holder.

3. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,

READ THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to

country or region. Be sure that the power supply voltage of the area

where this unit will be used meets the required voltage (e.g., AC

230240 V, 50 Hz) written on the rear panel.

4. Do not touch this unit with wet hands

Do not handle this unit or power cord when your hands are wet or

damp. If water or any other liquid enters the case, take this unit to

an authorized service center for inspection.

5. Location of this unit

Place this unit in a well-ventilated location.

Take special care to provide plenty of ventilation on all sides of this

unit especially when it is placed in an audio rack. If ventilation is

blocked, this unit may overheat and malfunction.

Do not expose this unit to direct sunlight or heating units as this

unit's internal temperature may rise and shorten the life of the

pickup.

Avoid damp and dusty places and places directly affected by vibra-

tions from the speakers. In particular, avoid placing the unit on or

above one of the speakers.

Be sure this unit is placed in a horizontal position. Never place it on

its side or on a slanted surface as it may malfunction.

Do not place near tuners or TV sets.

If placed next to a TV or tuner, it may cause reception interference

resulting in some noise in the TV or tuner output.

6. Care

From time to time you should wipe the front and rear panels and the

cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a

weak solution of mild detergent and water, wring it out dry, and

wipe off the dirt. Following this, dry immediately with a clean cloth.

Do not use rough material, thinners, alcohol or other chemical sol-

vents or cloths since these could damage the finish or remove the

panel lettering.

7. Points to remember

If this unit is brought from a cold environment to a warm one or is

in a cold room that is quickly heated, condensation may form on

the pickup, preventing proper operation. In this case, remove the

disc and leave the power ON for about one hour to remove the con-

densation.

When transporting this unit, be careful not to bump it.

For British model

Replacement and mounting of an AC plug on the power supply cord

of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the

following code:

Blue

: Neutral

Brown : Live

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the termi-

nals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the termi-

nal which is marked with the letter L or coloured red.

IMPORTANT

A 5 ampere fuse is fitted in this plug. Should the fuse need to be

replaced, please ensure that the replacement fuse has a rating of 5

amperes and that it is approved by ASTA or BSI to BS1362. Check

for the ASTA mark or the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE

SOCKET OUTLET IN YOUR HOME, THEN THE FUSE

SHOULD BE REMOVED AND THE PLUG CUT OFF AND DIS-

POSED OF SAFELY. THERE IS A DANGER OF SEVERE

ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED

INTO ANY 13 AMPERE SOCKET.

If in any doubt, please consult a qualified electrician.

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH

INDUSTRIESTRASSE 20

82110 GERMERING,

GERMANY

GERMERING, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

A.HORIUCHI

declare in own responsibility, that the ONKYO product described

in this instruction manual is in compliance with the corresponding

technical standards such as EN60065, EN55013, EN55020 and

EN61000-3-2, -3-3.

4

Features

I High-quality sound design in concert with the concept

of "Onkyo Soundism"

The high-quality playback performance offers a powerful yet

musically elegant sound that "re-creates music that not only

sounds `beautiful' but also echoes in the soul."

I AccuPulse D/A converter with Single-bit PWM (Pulse

Width Modulation) technology

The D/A converter uses AccuPulse D/A conversion with Single-

bit PWM (Pulse Width Modulation) technology that generates

zero cross-distortion and improves non-linearity to achieve high-

quality sound.

I Two optical digital outputs

You can connect up to two digital recording devices, such as a

DAT deck and an MD recorder.

I Peak search (Remote controller only)

I Next selection (Remote controller only)

I Memory and Memory reverse

The Memory function enables you to select tracks to play; the

Memory reverse function enables you to easily specify tracks

you did not wish to play.

I 36-Track Random Memory (Remote controller only)

I Five mode repeat function: entire side, single track, A-B,

memory and shuffle (Remote controller only)

I 10-key direct track access (Remote controller only)

Supplied accessories

Check that the following accessories are supplied with this unit.

REMO

TE C

ON

TR

OLL

ER

RC

-402

C

PEAK

SE

AR

CH

+10

0

TIME

ED

IT

CLE

AR

MEM

OR

Y

REP

EAT

DIS

PLAY

7

8

4

5

12

9

6

3

ECTIO

N

A

B

SHU

FFL

E

Audio connection cable

×1

cable

× 1

Remote controller

× 1

Batteries (size AA, R6 or UM-3)

× 2

5

Before operating this unit

1. Remove the battery compartment cover by opening it as shown in

the illustration.

2. Insert two AA (R6- or UM-3)-size batteries into the battery compart-

ment. Carefully follow the polarity diagram (positive (+) and nega-

tive () symbols) inside the battery compartment.

3. After batteries are installed and seated correctly, replace the com-

partment cover.

Notes

· Do not mix new batteries with old batteries or different kinds of

batteries.

· To avoid corrosion, remove the batteries if the remote controller

is not to be used for a long time.

· Remove dead batteries immediately to avoid damage from cor-

rosion. If the remote controller doesn't operate smoothly,

replace both the batteries at the same time.

· The life of the batteries supplied is about six months but this

will vary depending on usage.

Point the remote controller toward the remote control sensor.

Notes

· Place the unit away from strong light such as direct sunlight or

inverted fluorescent light which can prevent proper operation of the

remote controller.

· Using another remote controller of the same type in the same

room or using the unit near equipment which uses infrared rays

may cause operational interference.

· Do not put any object such as a book on the remote controller.

The buttons of the remote controller may be pressed by mistake

and drain the batteries.

· Make sure the audio rack doors do not have colored glass. Plac-

ing the unit behind such doors may prevent proper remote con-

troller operation.

· If there is any obstacle between the remote controller and the

remote control sensor, the remote controller will not operate.

Installing the remote controller batteries

Using the remote controller

3

2

1

Remote

control sensor

30°

DX-7333

approx. 5 m

(16 feet)

REM

OTE

CO

NT

RO

LLE

R

RC-4

02C

PEA

K SE

ARC

H

+10

0

TIM

E ED

IT

CLE

AR

ME

MO

RY

REP

EAT

DIS

PLA

Y

7

8

4

5

1

2

9

6

3

NEX

T

SEL

ECT

ION

AB

SHU

FFL

E

ONKYO DX-7333 Owner's Manual

Manual details

We guarantee that...

Sample pages

Reviews

Related Products

ONKYO TXNR801 Service Manual

ONKYO DX-C311 Owner's Manual

ONKYO TX-840M Service Manual

ONKYO CP-101A Owner's Manual

ONKYO TX-20 Service Manual

Popular Brands

General

Members Area