KENWOOD KDCC662 Owner's Manual

Cover page of KENWOOD KDCC662 Owner's Manual

Owner's Manual for KENWOOD KDCC662, downloadable as a PDF file.

We also have service manual to this model.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 8 pages
  • File size: 0.28 MB
  • Available language versions: English
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
KDC-C712
KDC-C662
KDC-C462
COMPACT DISC AUTO CHANGER
INSTRUCTION MANUAL
© B64-1381-00 (EF)
background image
KDC-C712
KDC-C662
KDC-C462
COMPACT DISC AUTO CHANGER
INSTRUCTION MANUAL
© B64-1381-00 (EF)
background image
Safety precautions
2
Take the following precautions to prevent fire
and avoid personal injury :
· Check that no metal objects (coins, tools,
etc.) are left inside the unit to avoid short
circuits.
· If you smell or see smoke, turn the power off
immediately and consult your Kenwood
dealer.
Take the following precautions to keep the
unit in proper working order.
· Do not open the top or bottom cover.
· Do not install the unit in places it is exposed
to direct sunlight, high heat or humidity,
water may splash over it, or dust exists.
· Do not install the unit at a dusty place. If the
unit is installed at a dusty place, dust
accumulates inside the unit and unit may be
damaged.
· When drilling a hole in the car to fix the
brackets, make sure not to damage the fuel
tank, brake tube, wiring harnesses, etc. on
the other side.
· If the unit is installed near speakers, the
speakers vibration may causes a sound skip.
Install the unit as far away as possible from
the speakers.
· If you have difficulty in installing this unit in
your vehicle, contact your Kenwood dealer.
· If it doesn't seem to be working properly, first
press the Reset button. If the malfunction
persists, consult your Kenwood dealer.
IMPORTANT INFORMATION
· This unit is NOT designed to be connected
directly to control units that are manufactured
and sold before 1994. If used with such units,
an optional CA-SD200 (sold separately) must
be used.
FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN DAMAGE
TO THIS UNIT AND CONTROL UNIT.
<KDC-C712/C622>
· The disc name preset function can register
names of up to 100 discs using up to 12
characters for each disc name.
The availability of this function as well as the
number of discs which can be registered
using this function and the number of usable
characters may be variable depending on the
control unit in use.
<KDC-C462>
· The disc name preset feature can store the
names of up to 50 discs in memory. This
feature may sometimes unable to be
controlled from the control unit.
Do Not Use Special Shape CDs
· Be sure to use round shape CDs only for this
unit and do not use any special shape CDs.
Use of special shape CDs may cause the unit
to malfunction.
· Be sure to use CDs with disc mark
only for this unit.
Do Not Use CDs with Sticker on the
Labeled Side
· Do not use the CD with the label sticker stuck
on it.
Using such a CD may cause the CD to be
deformed and the sticker to peel off, resulting
in malfunction of the unit.
Cleaning the unit
· If the front panel is dirty, wipe it clean with a
silicon cloth or soft dry cloth with the power
off.
Do not use hard cloths or paint thinner,
alcohol, or other volatile solvents. These may
damage external surfaces or remove indicator
characters.
Lens fogging
· In cold climates, there may be a period after
you turn on your vehicle's heater when the
lens that guides the laser beam used in your
CD player fogs up. If this happens, you
cannot play compact discs. Take out discs
and the fogging will disappear. If it does not
return to normal after several hours, contact
your Kenwood dealer.
Heat protection
· In warm climates, when vehicles are left
standing in direct sunlight with the windows
closed, the temperature inside can rise above
60°C. The unit's protection circuits will then
display the message "HOLD" and prevent the
player from operating. Just open the
windows or turn on the air conditioning. As
soon as the "HOLD" message disappears, the
player will operate normally.
2CAUTION
NOTE
2CAUTION
2WARNING
background image
Handling compact discs
3
Stains, scratches, or warping can
cause skipping, malfunction, or low
sound quality. Take the following
precautions to avoid damage to the
compact discs.
· Avoid touching the recorded side (the side
without the titles on) when you hold a
compact disc.
· Do not stick paper tape, etc. on either stick of
the disc.
· Do not store discs where they will be
exposed to direct sunlight (such as on the
seat and dashboard) or high heat.
· If you do not use your unit for an extended
time, remove the discs from the unit and put
them in their cases. Do not leave them lying
around without cases, piled up, or leaning on
a wall and so on.
· If you attach an adapter to an 8 cm (3")
compact disc and load it into this unit, the
adapter may be detached from the disc,
causing damage to the unit. Do not use 8 cm
(3") compact discs.
Warning
The marking of products using lasers
(Except for some areas)
The label is attached to the chassis/case and
says that the component uses laser beams that
have been classified as Class 1. It means that
the unit is using laser beams that are of a
weaker class. There is no danger of hazardous
radiation outside the unit.
CLASS 1
LASER PRODUCT
background image
Loading compact discs
4
'
'
O - N
'
'
'
1. Make sure the disc magazine is the right way
up with the "disc" logo on the top.Pull the tray
out by the projection.
2. Place the disc on the tray with the label facing
upwards. Insert the tray into the disc
magazine until it locks. Check that the discs
and trays are inserted properly. The discs are
numbered from the bottom from 1 to 6 or 10.
· Take care to insert trays into the correct
grooves in the disc magazine and to insert
discs properly into the tray grooves.
Otherwise malfunction may occur or the disc
may be damaged.
· Insert all trays even when some of them do
not carry discs. Otherwire malfunction or
operation failure may occur.
· 8-cm discs cannot be used. If an 8-cm disc
adapter is used, the disc cannot be ejected.
2CAUTION
3. Open the CD changer door.
4. Insert the magazine into the CD changer until
it clicks.
5. Close the CD changer door.
Use the CD changer with its door closed to
prevent the entry of dust into the changer.
6. Magazine ejection
Open the CD changer door, and press the
"EJECT" button.
Be sure to open the door completely before
pressing the EJECT button. If the door is not
completely open, the magazine may hit the
door and cause damage of malfunction.
NOTE
NOTE
Projection
"EJECT"
1
2
3
45
6
Tray
background image
5
Connections
90
45
0
O - N
D Changer control cable (5m)
Control unit (optional)
"O"
"N"
Changer control terminal
· Do not connect the changer control cable while the control unit is turned ON.
· Be sure to press the reset button after installation.
· Do not install an antenna of radio equipment or distribute the antenna cable near the changer output
cable, for this could cause malfunction with this unit.
s Setting the O-N switch
Set the O-N switch (lying to the right of the EJECT key) depending on the unit connected, as follows:
· Consult the instruction manual for your control unit to check whether or not it is CD text capable.
That information can be found on the page for External Disc Control in the section concerning
switching to "N."
· In the "N"-operation mode, the disc titles and track titles provided by the CD text function can be
displayed. (only KDC-C712/C662)
2CAUTION
Control unit
Changer switching
unit
O-N switch setting
CD text-capable
None
KCA-S210A
NN
Not CD text-capable
None
KCA-S210A
KCA-S200
OO
O

Reviews

There are no reviews of this manual yet.