PIONEER VSW-1/RYL7 Owner's Manual

Cover page of PIONEER VSW-1/RYL7 Owner's Manual

Owner's Manual for PIONEER VSW-1/RYL7, downloadable as a PDF file.

We also have service manual to this model.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 44 pages
  • File size: 3.47 MB
  • Available language versions: French, English, Spanish, Dutch, German, Chinese Traditional, Italian
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
Operating Instructions
Mode d'emploi
Bedienungsanleitung
Istruzioni per l'uso
Gebruiksaanwijzing
Manual de instrucciones
VIDEO SWITCHER
SWITCHER VIDEO
VIDEO-SCHALTGERÄT
VIDEO SWITCHER
VIDEO-OMSCHAKELEENHEID
CONMUTADOR DE VÍDEO
VSW-1
background image
Operating Instructions
Mode d'emploi
Bedienungsanleitung
Istruzioni per l'uso
Gebruiksaanwijzing
Manual de instrucciones
VIDEO SWITCHER
SWITCHER VIDEO
VIDEO-SCHALTGERÄT
VIDEO SWITCHER
VIDEO-OMSCHAKELEENHEID
CONMUTADOR DE VÍDEO
VSW-1
background image
2
En <DRB1375>
Do not connect either wire to the earth terminal of a
three pin plug.
NOTE
After replacing or changing a fuse, the fuse cover in
the plug must be replaced with a fuse cover which
corresponds to the colour of the insert in the base
of the plug or the word that is embossed on the
base of the plug, and the appliance must not be
used without a fuse cover. If lost replacement fuse
covers can be obtained from your dealer.
Only 5 A fuses approved by B.S.I or A.S.T.A to
B.S.1362 should be used.
D3-4-2-1-2-2_En
The wires in this mains lead are coloured in
accordance with the following code:
Blue
: Neutral
Brown : Live
If the plug provided is unsuitable for your socket
outlets, the plug must be cut off and a suitable plug
fitted.
IMPORTANT
FOR USE IN THE UNITED
KINGDOM
The cut-off plug should be disposed of and must
not be inserted into any 13 amp socket as this can
result in electric shock. The plug or adaptor or the
distribution panel should be provided with 5 A fuse.
As the colours of the wires in the mains lead of this
appliance may not correspond with coloured
markings identifying the terminals in your plug,
proceed as follows ;
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified
service personnel.
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filed
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
or moisture.
D3-4-2-1-3_A_En
WARNING
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230V
or 120V) written on the rear panel.
D3-4-2-1-4_A_En
Before plugging in for the first time, read the following
section carefully.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
­ Reorient or relocate the receiving antenna.
­ Increase the separation between the equipment and receiver.
­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
­ Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_En
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the
unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and
televisions, use shielded cables and connectors for connections.
D8-10-3a_En
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1_En-A
WARNING
To prevent a fire hazard, do not place any naked
flame sources (such as a lighted candle) on the
equipment.
D3-4-2-1-7a_A_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 5 cm at rear, and 5 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the
product, and to protect it from overheating. To
prevent fire hazard, the openings should never be
blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the
equipment on thick carpet or a bed.
D3-4-2-1-7b_A_En
Operating Environment
Operating environment temperature and humidity:
+5 ºC ­ +35 ºC (+41 ºF ­ +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c_A_En
This product complies with the Low Voltage Directive
(73/23/EEC, amended by 93/68/EEC), EMC Directives
(89/336/EEC, amended by 92/31/EEC and
93/68/EEC).
D3-4-2-1-9a_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-1a_A_En
CAUTION
The POWER switch on this unit will not completely
shut off all power from the AC outlet. Since the
power cord serves as the main disconnect device for
the unit, you will need to unplug it from the AC outlet
to shut down all power. Therefore, make sure the
unit has been installed so that the power cord can
be easily unplugged from the AC outlet in case of an
accident. To avoid fire hazard, the power cord should
also be unplugged from the AC outlet when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-2a_A_En
When using this product follow the instructions
written on the underside of the unit, which
concern rated voltage, etc.
D3-4-2-2-4_En
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the user's
right to operate the equipment.
D8-10-2_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002_En
Voltage selector
You can find the voltage selector switch on the bottom plate of the unit.
The factory setting for the voltage selector is 220 ­ 240 V.
Please set it to the correct voltage for your country or region.
· Saudi Arabia operates on 127 V and 220 V mains voltage. Please set to the correct
voltage before using.
· For Taiwan, please set to 220 ­ 240 V before using.
· For Mexico, please set to 220 ­ 240 V before using.
Before changing the voltage, disconnect the AC power cord. Use a medium size screw-
driver to change the voltage selector switch.
D3-4-2-1-5_En
110 ­ 120V
220 ­ 240V
VOLTAGE
SELECTOR
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading
the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory
drawings. However the method of connecting and operating the unit is the same.
K015 En
background image
3
<DRB1375> En
English
Features
1. Quick response
Using the latest circuit technology, this unit
suppresses noises and color distortion even
during sudden switchovers.
2. Automatic switching
Can be combined with a Pioneer DJ mixer for
video switching linked to the fader start mode.
3. Full complement of input/output
connectors
Supports component video, S-Video, and
composite video IN/OUT signals.
(Signals are only input and output; no conversion function
is provided.)
Handling Precautions
Installation location
¶ Do not install above an amplifier or other heat-emitting com-
ponent, or use for long periods near spotlights or other head-
emitting appliances, since the unit may suffer adverse effects.
¶ Install away from tuners and television sets. When placed
near such components, noise and video distortion may occur;
such effects are particularly subject to occurrence when an
internal antenna is used; in such cases, either use an external
antenna, or turn off this unit's power.
¶ The screws on the right and left sides of this unit can be used
to mount the unit in a rack installation or stand. For details,
consult your dealer.
Note:
When installing the unit in a rack or stand, always use the screw
holes provided on the right and left sides of the unit.
Specifications
1. General
Power ............................ AC 110-120 V/AC 220-240 V, 50/60 Hz
Power consumption ............................................................ 9 W
Operating temperature ....................................... +5°C to +35°C
Storage temperature ......................................... ­40°C to +60°C
Operating humidity .............. 5-85 % R.H. (without precipitation)
Weight .............................................................................. 1.4 kg
External dimensions ................. 250 (W) x 88 (D) x 87.5 (H) mm
(not including connectors, buttons and other protruding parts)
2. Video input section (input level/impedance)
Component video ................... BNC connectors x 3 (2 systems)
Y ...................................................................... 1 Vp-p / 75
CB/PB ............................................................. 0.7 Vp-p / 75
CR/PR ............................................................. 0.7 Vp-p / 75
S-Video ................................................ S connector (2 systems)
Y ...................................................................... 1 Vp-p / 75
C ............................................................... 0.286 Vp-p / 75
Composite video ............................ RCA connector (2 systems)
1 Vp-p / 75
3. Video output section (output level/impedance)
Component video ..................... BNC connectors x 3 (1 system)
Y ...................................................................... 1 Vp-p / 75
CB/PB ............................................................. 0.7 Vp-p / 75
CR/PR ............................................................. 0.7 Vp-p / 75
S-Video .................................................. S connector (1 system)
Y ...................................................................... 1 Vp-p / 75
C ............................................................... 0.286 Vp-p / 75
Composite video .............................. RCA connector (1 system)
1 Vp-p / 75
4. Sync signal output section
Sync output .................................... BNC connector (2 systems)
1 Vp-p / 75
Supported video modulation systems ....................... NTSC/PAL
5. Other connectors
Control input ................................... minijack (3.5 dia) 2 systems
Control output ................................ minijack (3.5 dia) 2 systems
6. Accessories
¶ BNC cables .......................................................................... 2
¶ Control cables ...................................................................... 2
¶ Operating Instructions ......................................................... 1
For improvement purposes, specifications and design may be
subject to modification without notice.
Cleaning the Unit
÷ Use a polishing cloth to wipe off dust and dirt.
÷ When the surfaces are very dirty, wipe with a soft cloth dipped
in some neutral cleanser diluted five or six times with water
and wrung out well, then wipe again with a dry cloth. Do not
use furniture wax or cleaners.
÷ Never use thinners, benzene, insecticide sprays or other
chemicals on or near this unit, since these will corrode the
surfaces.
Features/Specifications
background image
4
En <DRB1375>
Connections
PLAYER B
PLAYER A
MIXER
MIXER
VIDEO OUT
CHROMA SYNC
COMPONENT
COMPOSITE
S
COMPOSITE
COMPOSITE
COMPOSITE
COMPONENT
S
S
S
CB / PB
CB / PB
COMPONENT
CB / PB
Y
Y
Y
SYNC
SYNC
PL A CONT
PL B CONT
PL CONT
PL CONT
CR / PR
CR / PR
CR / PR
1
2
3
4
5
6
Connections
Connection Panel
1. PLAYER B connectors
Use to connect this unit to player B (DVJ-X1).
COMPOSITE
Composite video input connector (RCA pin jack x 1).
Use video cable (provided with DVJ-X1) to connect to player B's VIDEO
OUT connector.
S
S-Video input connector (4-pin mini DIN connector x 1).
Use a S-Video cable (sold separately) to connect to the player B's S-
Video VIDEO OUT connector.
COMPONENT
Component video input connectors (BNC connectors x 3).
Use 3 BNC plug coaxial cables (sold separately) to connect to player
B's component video output connectors (Y, CB/PB, CR/PR).
PL CONT
Player control connector, used to control player, fader start and other
operations (minijack x 1).
Use the control cable (provided with DVJ-X1) to connect to player B's
CONTROL connector.
SYNC
Video sync signal output connector (BNC connector x 1).
The sync signal is used to synchronize video signals between players
A and B, thus preventing video distortion resulting from mix-matched
signals when switching between images.
Use the BNC plug coaxial cable (furnished with this unit) to connect
to player B's SYNC IN connector.
2. Player B control input connector (MIXER)
PL B CONT
Intermediary connector for player control signals (for fader start, etc.)
from the DJ mixer (minijack x 1).
Use the control cable (furnished with this unit) to connect to the CON-
TROL connector of the channel which will control the DJ mixer's player
B.
3. PLAYER A connectors
Use to connect this unit to player A (DVJ-X1).
COMPOSITE
Composite video input connector (RCA pin jack x 1).
Use a video cable (supplied with DVJ-X1) to connect to player A's
VIDEO OUT connector.
S
S-Video input connector (4-pin mini DIN connector x 1).
Use a S-Video cable (sold separately) to connect to the player A's S-
Video VIDEO OUT connector.
COMPONENT
Component video input connectors (BNC connectors x 3).
Use 3 BNC plug coaxial cables (sold separately) to connect to player
A's component video output connectors (Y, CB/PB, CR/PR).
PL CONT
Player control connector, used to control player, fader start and other
operations (minijack x 1).
Use the control cable (provided with DVJ-X1) to connect to player A's
CONTROL connector.
SYNC
Video sync signal output connector (BNC connector x 1).
The sync signal is used to synchronize video signals between players
A and B, thus preventing video distortion resulting from mix-matched
signals when switching between images.
Use the BNC plug coaxial cable (furnished with this unit) to connect
to player A's SYNC IN connector.
4. Player A control input connector (MIXER)
PL A CONT
Intermediary connector for player control signals (for fader start, etc.)
from DJ mixer (minijack x 1).
Use the control cable (furnished with this unit) to connect to the CON-
TROL connector of the channel that will control the DJ mixer's player
A.
5. VIDEO OUT connectors
Connect to video monitor.
Note:
In order to produce the various video system outputs, the same input
system signals are necessary (the unit does not perform video signal
conversion).
COMPOSITE
Composite video output connector for player A or player B as se-
lected by this unit (RCA pin jack).
S
S-Video output connector for player A or player B as selected by this
unit (4-pin mini DIN connector).
In order to support very quick switching of video signals, this unit
does not support S2 video signals.
Y, CB/PB, CR/PR
Component video output connectors for player A or player B as se-
lected by this unit (BNC connectors x 3).
6. CHROMA SYNC selector switch
Use to select chroma signal phase comparator. Set this in accord-
ance with the setting of the main monitor connected to the video
output connectors.
S
Sets chroma signal phase comparator to S-Video.
COMPOSITE
Sets chroma signal phase comparator to composite video signal.
COMPONENT
Phase comparison is not performed. Use this position when using
components other than DVJ-X1.
background image
5
<DRB1375> En
English
Connections
Basic Connections
This unit is designed to allow switching between component video, S-Video, and composite video signals, but does not support signal
conversion. As a result, the same signals required for output must be input. Also make sure that the signals from both player A and B
are in the same signal format (code) during use. Further, while three different types of signals can be connected simultaneously for
switching between them, only one of the types must be selected for chroma signal synchronization.
When connecting or changing the installation of components, always turn off power and disconnect power cord's plug from
their outlets before proceeding.
VSW-1
DVJ-X1
DVJ-X1
PLAYER B
PLAYER A
MIXER
MIXER
VIDEO OUT
CHROMA SYNC
COMPONENT
COMPOSITE
S
COMPOSITE
COMPOSITE
COMPOSITE
COMPONENT
S
S
S
CB / PB
CB / PB
COMPONENT
CB / PB
Y
Y
Y
SYNC
SYNC
PL A CONT
PL B CONT
PL CONT
PL CONT
CR / PR
CR / PR
CR / PR
MODE
OUT
L
YCB
CR PR
PB
R
S
S
SYNC IN
AUDIO OUT
VIDEO OUT
COMPOSITE
PREVIEW OUT
DIGITAL
DJ
NORMAL
CONTROL
VIDEO
INPUT
S-VIDEO
INPUT
MODE
OUT
L
YCB
CR PR
PB
R
S
S
SYNC IN
AUDIO OUT
VIDEO OUT
COMPOSITE
PREVIEW OUT
DIGITAL
DJ
NORMAL
CONTROL
VIDEO
INPUT
S-VIDEO
INPUT
VIDEO
INPUT
S-VIDEO
INPUT
Y
CB
CR PR
PB
COMPONENT
VIDEO INPUT
DJ mixer
Main monitor
Player B
Preview monitor
Player A
Preview monitor
Video cable furnished with DVJ-X1
BNC plug coaxial cable furnished with this unit
Control cable furnished with this unit or with DVJ-X1
Audio cable furnished with DVJ-X1
Video cable (sold separately)
S-Video cable (sold separately)
BNC plug coaxial cable (sold separately)
Power cord connection
After all other connections are completed, insert the power cord's plug into a wall power outlet or the auxiliary power outlet of an
amplifier.

Reviews

There are no reviews of this manual yet.