PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2007
T ZZA JAN. 2007 Printed in Japan
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
The grille is attached to the cabinet by its bosses applied with
adhesive. To detach it, first unfasten 4 screws of the top plate.
Next detach the top plate with the packing. Then pry it open by
inserting a flat blade screwdriver into the grille upper side. To
attach it, first attach the top plate and packing by 4 screws. Next
apply adhesive to the holes on the baffle. Then press it to the
The cosmetic grille is attached to the cabinet by packing with
double-faced adhesive tape and catches. To detach it, first re-
move the grille. Then pry it open by inserting a flat blade screw-
driver into upper side. To re-attach it, adjust the catch of the
cosmetic grille to the baffle board. Then press it to the cabinet.
The woofer is attached to the baffle by 4 external screws. To
detach it, unfasten those screws and turn it 45 degrees counter-
clockwise. When attaching it, face its terminal upward.
The tweeter is attached to the baffle by 3 external screws. To
detach it, unfasten those screws. When attaching it, face its ter-
Network ASSY is attached to the cabinet as shown in the left
figure. The network assy is attached to the baffle by 4 internal
screws. To detach it, unfasten those screws. To detach it, re-
move the grille. Then detach the baffle board (18 screws). To
attaching it, fit its hole into the hollow on the baffle.
Choke coil face downward