PIONEER DJM-1000/WYXJ Owner's Manual

Cover page of PIONEER DJM-1000/WYXJ Owner's Manual

Owner's Manual for PIONEER DJM-1000/WYXJ, downloadable as a PDF file.

We also have service manual to this model.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 98 pages
  • File size: 5.43 MB
  • Available language versions: French, English, Spanish, Dutch, German, Italian
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
DJ MIXER
TABLE DE MIXAGE
DJ-MISCHPULT
MIXER PER DJ
DJ MENGPANEEL
MESA DE MEZCLAS DJ
DJM-1000
Operating Instructions
Mode d'emploi
Bedienungsanleitung
Istruzioni per l'uso
Gebruiksaanwijzing
Manual de instrucciones
background image
DJ MIXER
TABLE DE MIXAGE
DJ-MISCHPULT
MIXER PER DJ
DJ MENGPANEEL
MESA DE MEZCLAS DJ
DJM-1000
Operating Instructions
Mode d'emploi
Bedienungsanleitung
Istruzioni per l'uso
Gebruiksaanwijzing
Manual de instrucciones
background image
2
<DRB1372>
En
Do not connect either wire to the earth terminal of a
three pin plug.
NOTE
After replacing or changing a fuse, the fuse cover in
the plug must be replaced with a fuse cover which
corresponds to the colour of the insert in the base
of the plug or the word that is embossed on the
base of the plug, and the appliance must not be
used without a fuse cover. If lost replacement fuse
covers can be obtained from your dealer.
Only 3 A fuses approved by B.S.I or A.S.T.A to
B.S.1362 should be used.
D3-4-2-1-2-2_En
The wires in this mains lead are coloured in
accordance with the following code:
Blue
: Neutral
Brown : Live
If the plug provided is unsuitable for your socket
outlets, the plug must be cut off and a suitable plug
fitted.
IMPORTANT
FOR USE IN THE UNITED
KINGDOM
The cut-off plug should be disposed of and must
not be inserted into any 13 amp socket as this can
result in electric shock. The plug or adaptor or the
distribution panel should be provided with 3 A fuse.
As the colours of the wires in the mains lead of this
appliance may not correspond with coloured
markings identifying the terminals in your plug,
proceed as follows ;
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified
service personnel.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1_En-A
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002_En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading
the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory
drawings. However the method of connecting and operating the unit is the same.
K015 En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-1a_A_En
CAUTION
The POWER switch on this unit will not completely
shut off all power from the AC outlet. Since the
power cord serves as the main disconnect device for
the unit, you will need to unplug it from the AC outlet
to shut down all power. Therefore, make sure the
unit has been installed so that the power cord can
be easily unplugged from the AC outlet in case of an
accident. To avoid fire hazard, the power cord should
also be unplugged from the AC outlet when left
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-2a_A_En
This product complies with the Low Voltage Directive
(73/23/EEC, amended by 93/68/EEC), EMC Directives
(89/336/EEC, amended by 92/31/EEC and
93/68/EEC).
D3-4-2-1-9a_En
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filed
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
or moisture.
D3-4-2-1-3_A_En
WARNING
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230V
or 120V) written on the rear panel.
D3-4-2-1-4_A_En
Before plugging in for the first time, read the following
section carefully.
WARNING
To prevent a fire hazard, do not place any naked
flame sources (such as a lighted candle) on the
equipment.
D3-4-2-1-7a_A_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 5 cm at rear, and 3 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the
product, and to protect it from overheating. To
prevent fire hazard, the openings should never be
blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the
equipment on thick carpet or a bed.
D3-4-2-1-7b_A_En
Operating Environment
Operating environment temperature and humidity:
+5 ºC ­ +35 ºC (+41 ºF ­ +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c_A_En
background image
3
<DRB1372>
En
English
FEATURES
CONTENTS
1 High sound quality design
Analog signals are transmitted via the shortest path and converted
to digital signals by a 96 kHz sampling, 24 bit, high-quality A/D
converter, thus passing the signals to the digital mixing stage
under optimum conditions.
Through the use of a 32 bit DSP, mixing is achieved with zero
sound quality degradation, and together with simultaneous ideal
filtering, optimum sound is produced for professional DJs
working in clubs.
To get the most from these features, a great deal of care has been
paid to perfecting the sound quality, including a high-rigidity
chassis to cut down unnecessary vibrations that might affect the
sound, together with a high-performance power section using an
R-core transformer that supports bass quality, thus creating clear
and powerful sound ideal for club performances.
2 3 band isolator
Built-in 3-band isolator capable of producing level control +6 dB
to ­
on each bandwidth.
The sharp operation feel allows the realization of a wide variety of
DJ performances.
3 2-system, 3-type SEND/RETURN
A 2-system, 3-type SEND/RETURN (PRE INSERT/POST INSERT/
AUX) is provided to allow multiple connection variations with
other external devices, such as effectors and samplers, thus
widening the range of DJ play potential.
4 Fader curve adjust
The fader curve adjust allows adjustment not only the cross fader
curve (as on former models), but also of channel fader curve.
Both faders' functions can be adjusted within 17 steps, so that DJs
can customize the settings to their own preferred settings.
5 Digital IN/OUT
Using digital input connectors provided for each of the sampling
rates (44.1/48/96 kHz), a system can be built in which no sound
quality degradation occurs when connecting to external digital
devices.
A DIGITAL OUT connector with 24 bit/96 kHz sampling rate is
provided, facilitating recording at studios and other situations
demanding high sound quality.
Supports only linear PCM.
6 MIDI OUT
MIDI signals can be output to allow MIDI control of external
devices.
7 Digital link function
Multiple functions can be performed by using digital link cables to
connect other PIONEER DJ CD players, DJ effectors and AV
mixers.
8 Other features
÷ By using a control cable to connect the unit to a PIONEER DJ-
use CD player, playback can be started on the CD player in
automatic linkage to operation of the fader ("fader start play").
÷ Built-in "3-band equalizer" enabling level control within range
+6 dB to ­26 dB at each bandwidth.
÷ Features "2-band booth EQ" for control of booth monitor
response, thus facilitating booth monitoring by the DJ.
÷ Built-in "cross fader assign" function, enabling more flexible
assigning of each channel's input to the cross fader.
÷ Built-in "TALK OVER function" automatically lowers track
volume during MIC-input.
FEATURES ................................................................... 3
CONFIRM ACCESSORIES ........................................... 3
CAUTIONS REGARDING HANDLING ........................ 4
BEFORE USING
CONNECTIONS ............................................................ 5
CONNECTION PANEL ........................................... 5
POWER CORD CONNECTION ............................... 6
CONNECTING TO THE INPUT CONNECTORS ... 6
CONNECTING TO THE EFFECTOR AND
OUTPUT CONNECTORS ....................................... 7
MIDI CONNECTORS .............................................. 7
CONNECTING MICROPHONES, HEADPHONES ... 8
DIGITAL LINK CONNECTIONS ............................. 8
PART NAMES AND FUNCTIONS ............................... 9
OPERATIONS
OPERATIONS ............................................................. 13
BASIC OPERATIONS ........................................... 13
FADER CURVE ADJUSTMENTS ......................... 13
FADER START FUNCTION .................................. 14
USING EXTERNAL EFFECTORS ......................... 14
DIGITAL LINK FUNCTION ................................... 15
OTHER
TROUBLESHOOTING ................................................ 16
SPECIFICATIONS ....................................................... 17
BLOCK DIAGRAM .................................................... 100
CONFIRM ACCESSORIES
Operating Instructions ........................................................... 1
Power cord ............................................................................. 1
background image
4
<DRB1372>
En
Location
Install the unit in a well-ventilated location where it will not
be exposed to high temperatures or humidity.
÷ Do not install the unit in a location which is exposed to
direct rays of the sun, or near stoves or radiators.
Excessive heat can adversely affect the cabinet and
internal components. Installation of the unit in a damp or
dusty environment may also result in a malfunction or
accident. (Avoid installation near cookers etc., where the
unit may be exposed to oily smoke, steam or heat.)
÷ When the unit is used inside a carrying case or DJ booth,
separate it from the walls or other equipment to improve
heat radiation.
Installing the DJM-1000 in an EIA rack
The screw holes on the front panel of the DJM-1000 are
designed for use in attaching the unit to a 19-inch EIA rack.
÷ Attach the unit to the rack using screws of the appropriate
size (screws not provided with the unit).
÷ When installing the unit in a rack, take care to avoid
pinching your fingers.
Note
÷ Never place this unit directly above a power amplifier, as
the heat given off by the amplifier might result in damage
to the unit. Placing the unit directly above a power
amplifier might also result in ham radio signals being
picked up or in other types of interference.
÷ Allow at least 1U (43.7 mm) space between this
component and the one mounted above it, so as to
assure that the cords connected to this unit's input/output
connectors and terminals do not touch the component
above.
÷ Always be sure to remove the unit from its rack before
shipping.
÷ When moving the unit while still installed in its rack,
exercise caution to avoid subjecting the unit to shocks or
vibration.
Condensation
When this unit is brought into a warm room from previously
cold surroundings or when the room temperature rises
sharply, condensation may form inside, and the unit may
not be able to attain its full performance. In cases like this,
allow the unit to stand for about an hour or raise the room
temperature gradually.
Cleaning the Unit
÷ Use a polishing cloth to wipe off dust and dirt.
÷ When the surfaces are very dirty, wipe with a soft cloth
dipped in some neutral cleanser diluted five or six times
with water and wrung out well, then wipe again with a
dry cloth. Do not use furniture wax or cleaners.
÷ Never use thinners, benzene, insecticide sprays or other
chemicals on or near this unit, since these will corrode
the surfaces.
CAUTIONS REGARDING HANDLING
background image
BEFORE USING (CONNECTIONS)
5
<DRB1372>
En
English
CONNECTION PANEL
MIDI OUT
INPUT
OUTPUT
POWER
VISUAL
(MONO)
(MONO)
(MONO)
L
L
L
R
R
L
R
R
2 RETURN 1
EFX 1
EFX 2
CONTROL
SOUND 1
2
SEND
1
SIGNAL GND.
PHONO
LINE
(MONO)
L
R
LINE
(MONO)
L
R
LINE
(MONO)
L
R
LINE
1
SIGNAL GND.
SIGNAL GND.
L
R
CONTROL
SOUND 2
PHONO
2
L
R
CONTROL
DIGITAL
PHONO
3
L
R
CONTROL
DIGITAL
PHONO
4
L
R
CONTROL
DIGITAL
PHONO
5
L
L
L
BOOTH
R
R
L
R
R
48k
96k
fs(Hz)
CONTROL
DIGITAL
DIGITAL OUT
PHONO
MASTER 1
MASTER 2
REC
SUBMIC
SUBMIC
CD / LINE
CD / LINE
CD / LINE
CD / LINE
CD / LINE
CD / LINE
6
MASTER ATT.
­12dB
­6dB
­3dB
0dB
3
COLD
1
2
GND
HOT
OFF
ON
(TRS)
AC IN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
CONNECTIONS
1. POWER switch
2. MASTER output connector 1 (MASTER 1)
XLR type balanced output (male connector).
3. MASTER output connector 2 (MASTER 2)
RCA type unbalanced output.
4. MASTER output attenuator dial (MASTER ATT.)
Attenuates the output level of MASTER 1 and MASTER 2 output.
The level of attenuation can be chosen from 0 dB, ­3 dB, ­6 dB,
­12 dB.
5. Recording output connectors (REC)
RCA type output connector for recording.
6. PHONO input connectors
RCA type phono level (for MM cartridge) input connectors.
Do not use for input of line level signals.
7. Signal grounding terminal (SIGNAL GND)
Use to connect grounding wire from analog player.
Not a terminal for safety grounding.
8. CD/LINE input connectors
RCA type line level input connectors.
Use to connect DJ CD players and/or line level output devices.
9. SEND output connectors (SEND 1, 2)
Ø6.3 mm phone type output connectors.
Use to connects input connectors from external effectors, etc.
When only the L channel is connected, a monaural signal of L+R is
output.
10. MIDI output connector (MIDI OUT)
DIN type output connector.
Connects with other MIDI devices (P.7).
11. VISUAL link connector
When a digital link cable is used to connect the unit to a PIONEER
video mixer (switcher) supporting digital-linkage, the video
mixer's cross fader can be controlled using the cross fader of the
DJM-1000.
12. RETURN connectors (RETURN 1, 2)
Ø6.3 mm phone type output connectors.
Connect to input connectors of external effectors, etc.
When only the L channel is connected, the input in the L channel
will be input into the R channel.
13. EFX link input/output connectors (EFX 1, 2)
When a digital-link cable is used to connect the unit to a PIONEER
DJ effector supporting digital linkage (EFX-1000), SEND/RETURN
connections are performed at once digitally, and functions such as
fader effect are also enabled.
14. LINE input connectors
Ø6.3 mm phone type line level connectors.
When only the L channel is connected, the input to the L channel
will also be input into the R channel.
15. CDJ link input connectors (SOUND 1, 2)
When a digital-link cable is used to connect the unit to a PIONEER
DJ CD player supporting digital linkage, the digital audio
connections and control cable connections are performed at once,
and functions such as BPM synchro are also enabled.
16. DIGITAL input connectors
RCA type digital coaxial input connectors.
Connect to digital coaxial output connectors of DJ CD player, etc.
17. SUBMIC input connectors
Ø6.3 mm phone type microphone input connectors.
Utilizes the DJM-1000's channels 5 and 6 as microphone input
channels.
18. CONTROL connectors
Ø3.5 mm mini phone-type input connector for connecting control
cable to DJ CD player.
Allows use of the DJM-1000's fader function to control start/stop
of a connected DJ CD player.
19. BOOTH monitor output connectors
Ø 6.3 mm phone type output connectors for booth monitor.
Changes the volume with the BOOTH MONITOR dial (LEVEL),
unaffected to the MASTER fader (since output is TRS, both
balanced and unbalanced outputs are supported).
20. Digital output connector (DIGITAL OUT)
RCA type digital coaxial output connector.
Digital master output.
21. Sampling frequency selector switch (48k/96k)
Chooses the sampling frequency of the digital output (96 kHz or
48 kHz).
22. Power inlet connector (AC IN)
Connect to AC outlet plug with the provided power cord.

Reviews

There are no reviews of this manual yet.