PIONEER CDS-P4000/UC Owner's Manual

Cover page of PIONEER CDS-P4000/UC Owner's Manual

Owner's Manual for PIONEER CDS-P4000/UC, downloadable as a PDF file.

We also have service manual to this model.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 4 pages
  • File size: 0.33 MB
  • Available language versions: English
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
background image
Key Finder
DISPLAY buttons
CD Loading Slot
EJECT button
RESET button
Selecting fine audio equipment such as the unit you've just purchased is only the start of your
musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association's Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion ­ and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of
sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
· Start your volume control at a low setting.
· Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
· Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association's Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
Example
30
Quiet library, soft whispers.
40
Living room, refrigerator, bedroom away from traffic.
50
Light traffic, normal conversation, quiet office.
60
Air conditioner at 20 feet, sewing machine.
70
Vacuum cleaner, hair dryer, noisy restaurant.
80
Average city traffic, garbage disposals, alarm clock at two feet.
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE
90
Subway, motorcycle, truck traffic, lawn mower.
100
Garbage truck, chain saw, pneumatic drill.
120
Rock band concert in front of speakers, thunderclap.
140
Gunshot blast, jet plane.
180
Rocket launching pad.
Information courtesy of the Deafness Research Foundation.
Specifications
General
Power source .......... 14.4 V DC (10.8 ­ 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ............................................ 1 A
Dimensions
(DIN) (mounting size)
........................ 178 (W)
× 50 (H) × 153 (D) mm
[7 (W)
× 2 (H) × 6 (D) in.]
(nose) ................ 188 (W)
× 58 (H) × 20 (D) mm
[7-3/8 (W)
× 2-1/4 (H) × 3/4 (D) in.]
(D)
(mounting size)
........................ 178 (W)
× 50 (H) × 153 (D) mm
[7 (W)
× 2 (H) × 6 (D) in.]
(nose) ................ 170 (W)
× 46 (H) × 15 (D) mm
[6-3/4 (W)
× 1-3/4 (H) × 5/8 (D) in.]
Weight ...................................................... 1.2 kg (2.7 lbs.)
CD player
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format .................... Sampling frequency: 44.1 kHz
Number of quantizatin bits: 16; linear
Frequency characteristics .............. 5 ­ 20,000 Hz (±1 dB)
Signal-to-noise ratio ...... 94 dB (1 kHz) (IHF-A network)
Dynamic range ............................................ 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
Note:
· Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.
LEVEL INDICATOR
CD PLAYER
Operation Manual
CDS-P4000
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1760, Long Beach, California 90801, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087. Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: (905) 479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
San Lorenzo 1009 3er. Piso Desp. 302
Col. Del Valle Mexico, D.F. C.P. 03100
TEL: 5-688-52-90
Published by Pioneer Corporation.
Copyright © 2001 by Pioneer Corporation.
All rights reserved.
Publication de Pioneer Corporation.
Copyright © 2001 Pioneer Corporation.
Tous droits de reproduction et de traduction
réservés.
Printed in Japan
Imprimé au Japon
<CRB1631-A> UC
<KSNZF/01A00000>
background image
Key Finder
DISPLAY buttons
CD Loading Slot
EJECT button
RESET button
Selecting fine audio equipment such as the unit you've just purchased is only the start of your
musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association's Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion ­ and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of
sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
· Start your volume control at a low setting.
· Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
· Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association's Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
Example
30
Quiet library, soft whispers.
40
Living room, refrigerator, bedroom away from traffic.
50
Light traffic, normal conversation, quiet office.
60
Air conditioner at 20 feet, sewing machine.
70
Vacuum cleaner, hair dryer, noisy restaurant.
80
Average city traffic, garbage disposals, alarm clock at two feet.
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE
90
Subway, motorcycle, truck traffic, lawn mower.
100
Garbage truck, chain saw, pneumatic drill.
120
Rock band concert in front of speakers, thunderclap.
140
Gunshot blast, jet plane.
180
Rocket launching pad.
Information courtesy of the Deafness Research Foundation.
Specifications
General
Power source .......... 14.4 V DC (10.8 ­ 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ............................................ 1 A
Dimensions
(DIN) (mounting size)
........................ 178 (W)
× 50 (H) × 153 (D) mm
[7 (W)
× 2 (H) × 6 (D) in.]
(nose) ................ 188 (W)
× 58 (H) × 20 (D) mm
[7-3/8 (W)
× 2-1/4 (H) × 3/4 (D) in.]
(D)
(mounting size)
........................ 178 (W)
× 50 (H) × 153 (D) mm
[7 (W)
× 2 (H) × 6 (D) in.]
(nose) ................ 170 (W)
× 46 (H) × 15 (D) mm
[6-3/4 (W)
× 1-3/4 (H) × 5/8 (D) in.]
Weight ...................................................... 1.2 kg (2.7 lbs.)
CD player
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format .................... Sampling frequency: 44.1 kHz
Number of quantizatin bits: 16; linear
Frequency characteristics .............. 5 ­ 20,000 Hz (±1 dB)
Signal-to-noise ratio ...... 94 dB (1 kHz) (IHF-A network)
Dynamic range ............................................ 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
Note:
· Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.
LEVEL INDICATOR
CD PLAYER
Operation Manual
CDS-P4000
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1760, Long Beach, California 90801, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087. Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: (905) 479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
San Lorenzo 1009 3er. Piso Desp. 302
Col. Del Valle Mexico, D.F. C.P. 03100
TEL: 5-688-52-90
Published by Pioneer Corporation.
Copyright © 2001 by Pioneer Corporation.
All rights reserved.
Publication de Pioneer Corporation.
Copyright © 2001 Pioneer Corporation.
Tous droits de reproduction et de traduction
réservés.
Printed in Japan
Imprimé au Japon
<CRB1631-A> UC
<KSNZF/01A00000>
background image
Display Modes
Level Indicator Display
This product has eight display patterns (Mode 1 to Mode 8) from which you can choose one
at a time.
· Selecting the Level Indicator display.
Each press of the DISPLAY button changes the display in the following order:
Mode 1
Ô Mode 2 Ô Mode 3 Ô Mode 4 Ô Mode 5
Ô Mode 6 Ô Mode 7 Ô Mode 8 Ô Mode 1 ...
Mode 1, Mode 2, Mode 3 and Mode 4
Segments light from left to right according
to the audio level.
Mode 5
Segments light from the center, and
expand towards the sides according to the
audio level.
Mode 6
Display shows segments rotating from left
to right.
Mode 7
Depending on the audio level, different
segments light up.
Mode 8
Display turns off except for the "DISC SET"
and "PLAY" indications.
Example: Mode 8
Example: Mode 7
Example: Mode 6
Example: Mode 5
Example: Mode 1
Each press changes the Display ...
Precaution
· Keep this manual handy as a reference for operating procedures and precautions.
· Protect the product from moisture.
After-sales Service for Pioneer Products
Please contact the dealer or distributor from where you purchased the product for its after-
sales service (including warranty conditions) or any other information. In case the necessary
information is not available, please contact the companies listed below:
Please do not ship your product to the companies at the addresses listed below for repair
without advance contact.
For warranty information please see the Limited Warranty sheet included with your product.
Playing the CD Player
The CD player plays one standard 12 cm or 8 cm CD at a time. Do not use any adapter when
playing a 8 cm CD.
1. Insert the disc with the label side up.
2. For details concerning operation, refer to the back page of this manual.
3. Remove the disc.
Note:
· A disc left partially inserted after ejection may incur damage or fall out.
· If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Press the
EJECT button and check the disc for damage before reinserting it.
· If a CD is inserted with the recorded side up, it will be ejected automatically after a few moments.
· If the CD player cannot operate properly, an error message (such as "ERROR-14") appears on the
head unit display. Refer to "CD Player Troubleshooting".
· Do not insert anything other than a CD into the CD Loading Slot.
Lights up when a CD is playing.
Lights up when a CD is loaded.
Using the CD Player
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE SPEC-
IFIED HEREIN MAY RESULT IN HAZARDOUS RADIA-
TION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH THIS
PRODUCT WILL INCREASE EYE HAZARD.
7 U.S.A.
Pioneer Electronics Service, Inc.
CUSTOMER SERVICE
DEPARTMENT
P.O. Box 1760
Long Beach, CA 90801
800-421-1404
7 CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION
DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R OP2
(905) 479-4411
1-877-283-5901
Before Using This Product
About This Manual
Operate this CD Player with a Head Unit connected. For details concerning operation, refer
to the back page of this manual.
Important
The serial number of this device is located on the bottom of this product. For your own secu-
rity and convenience, be sure to record this number on the enclosed warranty card.
Resetting the Microprocessor
The microprocessor must be reset under the following conditions:
When using this product for the first time after installation.
When the machine fails to operate properly.
When strange (incorrect) messages appear on the display.
· To reset the microprocessor, press the RESET button with a pen tip or other
pointed instrument.
background image
Basic Operation of CD Player
Entering the Function Menu
The Function Menu lets you operate simple functions for the CD player.
Note:
· After entering the Function Menu, if you do not perform an operation within about 30 seconds, the
Function Menu is automatically canceled.
1. Select the desired mode in the Function Menu. (Refer to "Function Menu
functions".)
2. Operate a mode. (e.g. Repeat Play)
3. Cancel the Function Menu.
The button used and the operation it performs are
indicated by the key guidance indicator. Press the
5 button to switch the key guidance indicator ON,
and the
button to switch it OFF.
Each press changes the Mode ...
Track Search and Fast Forward/Reverse
· You can select between Track Search or Fast
Forward/Reverse by pressing the
2/3 button for a
different length of time.
Track Search
0.5 seconds or less
Fast Forward/Reverse
Continue pressing
Note:
· If the CD player cannot operate properly, an error message such as
"ERROR-14" is displayed. Refer to "CD Player Troubleshooting".
Play Time Indicator
Track Number Indicator
Selecting the CD Player Source
· Press the SOURCE button repeatedly until
the CD Player is selected.
The CD Player starts playing.
Key Finder
Operate CD Player functions with the buttons shown below.
Head Unit (e.g. KEH-P6010)
Note:
· For details concerning operation using the Remote Controller, refer to the Operation Manual of the
Head Unit.
5//2/3 buttons
SOURCE button
BAND button
FUNCTION button
PGM button
DISPLAY button
Using the CD Player
Operating with Different Head Units
This CD Player can be operated only with a separately sold Head Unit.
Instructions in this Operation Manual use a "KEH-P6010" Head Unit as an example.
Head Unit-Group 1
This group of Head Units features a FUNCTION button you can use to call up a Function
Menu to operate functions.
Operation using this group of Head Units is the same as with the "KEH-P6010",
operate following the instructions in this manual.
7 Examples of Group 1 Head Units
KEH-P601
KEH-P690
KEH-P5900
Head Unit-Group 2
This group of Head Units does not feature a FUNCTION button. However, the units allow
different direct operation of functions with dedicated buttons such as a RPT button.
When using the CD Player with this group of Head Units, refer to the Function
Compatibility Chart for Head Unit Group 2.
7 Examples of Group 2 Head Units
KEH-P4010
KEH-P490
KEH-P4900
KEH-P1010*
* This Unit does not feature the "Random Play" and "Scan Play" functions.
Note:
· The Operation Manual for an indivisual Head Unit may feature different instructions for operating a
CD Player. In such case, refer to those instructions.
Function Compatibility Charts
Each function operation described can be executed by pressing the corresponding buttons on
the Head Unit or the remote controller.
7 Head Unit Group 2
Function name
Button
Operation
Source Switching
SOURCE, SOURCE/OFF
:Select
Repeat Play
RPT
LOCAL/BSM
LOCAL/BSM (Hold for 2 seconds)
:Select
Random Play
RPT (Hold for 2 seconds)
LOCAL/BSM (Hold for 2 seconds)
:Select
Scan Play
PAUSE/BSM (Hold for 2 seconds)
PAUSE/SCAN (Hold for 2 seconds)
:Select
Pause
PAUSE/BSM
PAUSE/SCAN
LOCAL/BSM
:Select
Track Search
2 or 3 (Hold for 0.5 seconds or less)
:Select
Fast Forward/Reverse
2 or 3 (Continue pressing)
:Select
Displaying Disc Titles
· Press the DISPLAY button to change the Disc
Title display of the current disc.
Note:
· This function is available only when the Head Unit is connected
to a Multi-CD player.
· If you switch displays when no disc titles have been input, "NO
TITLE" is displayed.
· Repeat the preceding operation to return to the normal display.
background image
CD Player Troubleshooting
Error Message
When problems occur with CD playback, an error message appears on the head unit display.
Refer to the table below to identify the problem, then take the suggested corrective action. If
the error persists, contact your dealer or your nearest PIONEER Service Center.
Message
Possible cause
Recommended action
ERROR- 11, 12, 17, 30
Dirty disc.
Clean the disc.
ERROR- 11, 12, 17, 30
Scratched disc.
Replace the disc.
ERROR- 14
Unrecorded CD.
Check the disc.
ERROR- 10, 11, 12, 14,
Electrical or mechanical
Turn the ignition ON and OFF, or
17, 30, A0
problem.
switch to a different source, then back
to the CD player.
ERROR- 44
All tracks are setting track skip.
Replace the disc.
HEAT
CD player overheating.
Discontinue play until the machine
temperature drops.
CD Player and Care
Precaution
· Play only CDs bearing the Compact Disc Digital
Audio mark.
· This product is designed for use with conventional,
fully circular CDs only. Use of shaped CDs are not
recommended for this product.
· Check all CDs before playing and discard cracked, scratched or warped discs.
· Normal playback of CD-R discs other than those recorded with a music CD recorder may
not be possible.
· Playback of music CD-R discs, even those recorded with a music CD recorder, may not
be possible with this product due to disc characteristics or scratches or dirt on the disc.
Dirt or condensation on the lens inside this product may also prevent playback.
· This product conforms to the track skip function of the CD-R disc. The tracks containing
the track skip information are skipped over automatically.
· Read the precautions with the CD-R discs before using.
· Wipe dirty or damp discs outward from the center with a soft cloth.
· Avoid touching the recorded (iridescent) surface when
handling discs.
· Store discs in their cases when not in use.
· Keep discs out of direct sunlight and high temperatures.
· Do not affix labels or apply chemicals to discs.
· Condensation may collect inside the player when using the heater in cold weather, inter-
fering with playback. Turn it off for an hour or so and wipe damp discs with a soft cloth.
· Road shocks may interrupt CD playback.
COMPACT
DIGITAL AUDIO
Scan Play (T-SCAN)
Scan Play plays the first 10 seconds or so of each track on a CD in succession.
1. Press the FUNCTION button and select the Scan mode (T-SCAN) in the
Function Menu.
Note:
· Scan Play is canceled automatically after all the tracks on a disc have been scanned.
Pause (PAUSE)
Pause pauses the currently playing track.
1. Press the FUNCTION button and select the Pause mode (PAUSE) in the
Function Menu.
Note:
· You can also switch the Pause function ON/OFF by pressing the PGM button.
Disc Title Input (TITLE IN)
The CD player's Disc Title Input function is possible for up to 100 discs when a Multi-CD
player is installed.
The connected Head Unit's Operation Manual features details concerning operation. Refer
to "Disc Title Input" in the manual's "Using Multi-CD Players" section.
2. Switch the Pause ON/OFF
with the
5/ buttons.
3. When you find the desired
track, cancel the Scan Play by
pressing the
button.
If the Function Menu has been can-
celed automatically, select the Scan
mode in the Function Menu again.
2. Switch the Scan Play ON with
the
5 button.
Using the CD Player
Function Menu Functions
The following chart shows functions in the CD Player Function Menu.
This chart shows the function operation and button for each function.
7 CD Player
Function name (Display)
Button
Operation
Repeat Play (REPEAT)
5
:ON
:OFF
Random Play (RANDOM)
5
:ON
:OFF
Scan Play (T-SCAN)
5
:ON
:OFF
Pause (PAUSE)
5
:ON
:OFF
Note:
· With some Head Units, the Function Menu may feature a CD Sound Quality Adjustment (COMP)
function. When you combine this CD player with such a Head Unit, if "NO COMP" is displayed, it
indicates that the CD Sound Quality Adjustment function is not available.
Repeat Play (REPEAT)
Repeat Play plays the same track repeatedly.
1. Press the FUNCTION button and select the Repeat mode (REPEAT) in
the Function Menu.
Note:
· If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled.
Random Play (RANDOM)
Random Play plays the tracks on a CD in random order for variety.
1. Press the FUNCTION button and select the Random mode (RANDOM) in the
Function Menu.
2. Switch the Random Play
ON/OFF with the
5/
buttons.
2. Switch the Repeat Play
ON/OFF with the
5/
buttons.

Reviews

There are no reviews of this manual yet.