DR-L50
AMPLIFIER SECTION
Continuous power output (DIN)
Continuous Power output (EIAJ)
Total Harmonic Distortion
10 % at rated power
0.2 % at 1 watt output
IM Distortion
10 % at rated power
0.2 % at 1 watt output
TUNER SECTION
Tuning Range
FM: 87.50 to 108.00 MHz (50 kHz steps)
AM: (South American models)
530 to 1710 kHz (10 kHz steps)
Usable Sensitivity
FM: Mono
11.2 dBf, 1.0 µV (75 ohms IHF)
0.9 µV (75 ohms DIN)
Stereo
17.2 dBf, 2.0 µV (75 ohms IHF)
23 µV (75 ohms DIN)
AM: 30 µV
50 dB Quieting Sensitivity
FM: Mono
17.2 dBf, 2.0 µV (75 ohms)
Stereo
37.2 dBf, 20.0 µV (75 ohms)
Capture Ratio
FM: 2.0 dB
Image Rejection Ratio
FM: 40 dB (South American models)
AM: 40 dB
DVD SECTION
Signal readout system
Optical non-contact
Linear velocity
3.49 m/s (Single Layer)
3.84 m/s (Dual Layer)
Error correction system
Reed Solomon Product Code
Signal system
PAL/Auto Mode
Regional restriction code
European area: 2
South-east Asian area: 3
Australian and South American area: 4
PRC: 6
Output Level and Impedance
Composite
1.0Vp-p, 75 ohms
S-Video
Y:1.0 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component
Y:1.0 Vp-p, 75 ohms
(Except European models)
Pb, Pr: 0.7 Vp-p, 75 ohms
RGB(European models)
0.7 Vp-p, 75 ohms
Laser
Semiconductor laser, wavelength 650 nm
Frequency response
10 Hz to 44 kHz (96 kHz)
Signal-to-noise ratio (digital audio)
More than 100 dB
Audio dynamic range (digital audio)
More than 93 dB
Harmonic distortion (digital audio)
Less than 0.025%
Wow and flutter
Below threshold of measurability
Operating conditions
Temperature: 5 C to 35 C (41 F to 95 F),
Operation status: Horizontal
GENERAL
Power Supply
AC 120 volts, 60 Hz
Power Consumption
: 130 W
Power Consumption (standby mode)
: 2.0 W
29 W ( * )
Power Supply
AC 230-240 volts, 50 Hz
Power Consumption
: 120 W
Power Consumption (standby mode)
: 2.6 W
29 W ( * )
Specifications and features are subject to change without notice.
Damping Factor
40 at 8 ohms
Input Sensitivity and Impedance
21 to 15 dBm
LINE (TV/LINE, MD/CDR/TAPE)
200 mV/50 kohms
Output Level and Impedance
DIGITAL OPTICAL OUT
21 to
REC OUT (MD/CDR/TAPE)
200 mV, 2.2 kohms
PRE OUT(SUBWOOFER)
1 V, 470 ohms
Frequency Response
20 to 30,000 Hz : +/ 0.8 dB
Acoustic Control
1: +9 dB at 82 Hz
2: +9 dB at 82 Hz
+6 dB at 10,000 Hz
Signal-to-noise Ratio
100 dB (0.5 V INPUT LINE)
Muting
50 dB
Power Supply
AC 220-230 volts, 50/60 Hz
Power Consumption
: 120 W
Power Consumption (standby mode)
: 2.6 W
29 W ( * )
Dimensions (W x H x D)
435
81 366 mm (171/8
33/16
14 7/16 ins.)
Weight
7.0 kg (15.4 lb.)
(* ) When clock display is on.
(Other models)
522 to 1611 kHz (9 kHz steps)
IF Rejection Ratio
FM: 90 dB
AM: 40 dB
Signal-to-noise Ratio
FM: Mono
73 dB, IHF
Stereo
67 dB, IHF
AM: 40 dB
Alternate Channel Att. (+/ 400 kHz) FM: Mono
55 dB, IHF
Selectivity
FM: 50 dB, DIN 55dB, IHF
AM Suppression Ratio
FM: 50 dB
Harmonic Distortion
FM: Mono
0.2 %
Stereo
0.3 %
AM:
0.7 %
Frequency response
FM: 30 to 15,000 Hz (+/ 1.0 dB)
Stereo Separation
FM: 45 dB at 1,000 Hz
30 dB at 100 to 10,000 Hz
Stereo Threshold
FM: 17.2 dBf,
20 µV (75 ohms)
Output
FM: 750 mV
AM: 150 mV
85 dB (Other models)
Power Output (FTC)
All channels 25 watts per channel min.
RMS. into 6 ohms two channel driven,
1,000 Hz with no more than 10% total
harmonic distortion.
All channels 21 watts per channel min.
RMS. into 6 ohms two channel driven,
1,000 Hz
All channel 26 watts per channel min.
RMS. into 6 ohms two channel driven,
1,000 Hz
DIGITAL OPTICAL IN
15 dBm
SPECIFICATIONS
