CDR-205TX
TROUBLESHOOTING GUIDE-2
Messages during recording (continued)
Display
Cause
Remedy
Pro Disc
A CD-R or a CD-RW not for music recording use
Eject the disc and check whether it meets
(without the "FOR CONSUMER" marking)
the specifications for use with the
or a CD-RW has been inserted.
CDR-205TX. Always insert a disc that has
the markings "FOR CONSUMER" or "FOR
MUSIC USE ONLY" on its surface
Check Input
Synchronous recording cannot be
Record from a recordable source.
performed because the detected input
signal is from a source other than the CD,
MD, DAT, or DCC.
CD Dub Fail
CD dubbing cannot be performed because
Select "Digital In 1" for the input source.
"Digital In 1" is not selected for the input source.
CD dubbing cannot be performed because
Cancel the recording or recording standby state on
the connected component (Onkyo separate
the connected component.
collection's cassette deck or MD recorder)
is in the recording or recording standby state.
CD dubbing cannot be performed because
Make sure that proper connections is made for
the components are not properly connected.
the
cable, audio connection cables, and optical
digital cable.
Cannot Rec
Recording cannot be performed because
Replace it with a non-finalized CD-R.
a finalized CD-R is used.
Recording cannot be performed because
Replace it with a non-finalized CD-RW. Or, retry
a finalized CD-RW is used.
recording after unfinalizing it.
Messages during playback, name input, and other situations
Display
Cause
Remedy
Blank Disc
You have tried to play a disc that has
If the inserted disc is a CD-R or CD-RW
no recordings on it.
with no recordings, you may record onto it,
but it cannot be played.
No Disc
No disc has been inserted.
Open the disc tray and make sure that a
disc is inserted.
Name Disc
Finalizing a disc without disc name was
Enter a disc name before attempting finalization
attempted.
Name Full
Entering name information exceeding the
You can enter up to 1000 characters per disc
limitation of 1000 characters per disc was
attempted.
Full
Entering a name exceeding the limitation of
You can enter up to 100 characters per name
100 characters per name was attempted.
Erase Name
Name input cannot be performed because
Erase the name information retained in the unit. Or,
the unit retains name information for
write the retained name information to the previous
a previous disc.
disc and then enter name information to the new disc
A.Finalize
Name input cannot be performed during
Cancel auto finalization before performing name input
auto finalization.
Memory Full
Programming more than 25 tracks was
You can program up to 25 tracks.
attempted.
RI
