NAD C270 Owner's Manual

Cover page of NAD C270 Owner's Manual

Owner's Manual for NAD C270, downloadable as a PDF file.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 32 pages
  • File size: 0.3 MB
  • Available language versions: English
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
C270
Stereo Power Amplifier
Owner's Manual
GB
Manuel d'Installation
F
Bedienungsanleitung
D
Manual del Usuario
E
Manuale delle Istruzioni
I
Manual do Proprietário
P
Bruksanvisning
S
background image
C270
Stereo Power Amplifier
Owner's Manual
GB
Manuel d'Installation
F
Bedienungsanleitung
D
Manual del Usuario
E
Manuale delle Istruzioni
I
Manual do Proprietário
P
Bruksanvisning
S
background image
Warning: To reduce the risk of fire or electric shock, do not
expose this unit to rain or moisture.
The lightning flash with an arrowhead symbol within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
Do not place this unit on an unstable cart, stand or tripod, bracket
or table. The unit may fall, causing serious injury to a child or adult
and serious damage to the unit. Use only with a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold with
the unit. Any mounting of the device on a wall or ceiling should
follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
An appliance and cart combination should be moved with care.
Quick stops, excessive force and uneven surfaces may cause the
appliance and cart combination to overturn.
Read and follow all the safety and operating instructions before
connecting or using this unit. Retain this notice and the owner's
manual for future reference.
All warnings on the unit and in its operating instructions should be
adhered to.
Do not use this unit near water; for example, near a bath tub,
washbowl, kitchen sink, laundry tub, in a wet basement or near a
swimming pool.
The unit should be installed so that its location or position does not
interfere with its proper ventilation. For example, it should not be
situated on a bed, sofa, rug or similar surface that may block the
ventilation openings; or placed in a built-in installation, such as a
bookcase or cabinet, that may impede the flow of air through its
ventilation openings.
The unit should be situated from heat sources such as radiators,
heat registers, stoves or other devices (including amplifiers) that
produce heat.
The unit should be connected to a power supply outlet only of the
voltage and frequency marked on its rear panel.
The power supply cord should be routed so that it is not likely to be
walked on or pinched, especially near the plug, convenience
receptacles, or where the cord exits from the unit.
Unplug the unit from the wall outlet before cleaning. Never use
benzine, thinner or other solvents for cleaning. Use only a soft
damp cloth.
The power supply cord of the unit should be unplugged from the
wall outlet when it is to be unused for a long period of time.
Care should be taken so that objects do not fall, and liquids are not
spilled into the enclosure through any openings.
This unit should be serviced by qualified service personnel when:
A. The power cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the unit; or
C. The unit has been exposed to rain or liquids of any kind; or
D. The unit does not appear to operate normally or exhibits a
marked change in performance; or
E. The device has been dropped or the enclosure damaged.
DO NOT ATTEMPT SERVICING OF THIS UNIT
YOURSELF. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
Upon completion of any servicing or repairs, request the service
shop's assurance that only Factory Authorized Replacement Parts
with the same characteristics as the original parts have been used,
and that the routine safety checks have been performed to
guarantee that the equipment is in safe operating condition.
REPLACEMENT WITH UNAUTHORIZED PARTS MAY RESULT IN FIRE,
ELECTRIC SHOCK OR OTHER HAZARDS.
ATTENTION
POUR ÉVITER LES CHOC ELECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU
FOND.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT FULLY INSERT.
If an indoor antenna is used (either built into the set or installed
separately), never allow any part of the antenna to touch the metal
parts of other electrical appliances such as a lamp, TV set etc.
CAUTION
POWER LINES
Any outdoor antenna must be located away from all power lines.
OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to your tuner or tuner-
preamplifier, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/NFPA No.
70-1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes and
requirements for the grounding electrode.
a. Use No. 10 AWG (5.3mm2) copper, No. 8 AWG (8.4mm2)
aluminium, No. 17 AWG (1.0mm2) copper-clad steel or bronze
wire, or larger, as a ground wire.
b. Secure antenna lead-in and ground wires to house with stand-off
insulators spaced from 4-6 feet (1.22 - 1.83 m) apart.
c. Mount antenna discharge unit as close as possible to where lead-
in enters house.
d. Use jumper wire not smaller than No.6 AWG (13.3mm2) copper,
or the equivalent, when a separate antenna-grounding electrode
is used. see NEC Section 810-21 (j).
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL
CODE INSTRUCTIONS CONTAINED IN ARTICLE 810 - RADIO AND
TELEVISION EQUIPMENT.
NOTE TO CATV SYSTEM INSTALLER: This reminder is
provided to call the CATV system installer's attention to
Article 820-40 of the National Electrical Code that provides
guidelines for proper grounding and, in particular, specifies
that the ground cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
ATTENTION:
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
2
background image
3
REAR PANEL CONNECTIONS
FRONT PANEL CONTROLS
background image
QUICK START
1. Connect the speakers to the Speaker A terminals and pre-
amplifier to the "FIXED IN" inputs.
2. Plug in the AC power cord.
3. Press the POWER button to turn the NAD C270 on.
4. Press the required input selector.
NOTES ON INSTALLATION
Your NAD C270 should be placed on a firm, level surface. Avoid
placing the unit in direct sunlight or near sources of heat and
damp. Allow adequate ventilation. Do not place the unit on a soft
surface like a carpet. Do not place it in an enclosed position, such
a bookcase or cabinet, that may impede the airflow through the
ventilation slots. Make sure the unit is switched off before making
any connections.
The RCA sockets on your NAD C270 are colour coded for
convenience. Red and white are Right and Left audio respectively.
Use high quality leads and sockets for optimum performance and
reliability. Ensure that leads and sockets are not damaged in any
way and all sockets are firmly pushed home.
For best performance, use quality speaker leads of 16 gauge
(1.5mm) thickness or more. If the unit is not going to be used for
some time, disconnect the plug from the AC socket.
Should water get into your NAD C270, shut off the power to the
unit and remove the plug from the AC socket. Have the unit
inspected by a qualified service technician before attempting to
use it again. DO NOT REMOVE THE COVER, THERE ARE NO
USER-SERVICEABLE PARTS INSIDE.
Use a dry soft cloth to clean the unit. If necessary, lightly dampen
the cloth with soapy water. Do not use solutions containing benzol
or other volatile agents.
REAR PANEL CONNECTIONS (FIGURE 1)
1. FIXED IN
The Fixed Inputs take the input signal straight to the power
amplifier's circuitry. This set of inputs is normally used in a system
with only one power amplifier or multiple but identical power
amplifiers. Refer also to section "Variable In" in this chapter for
more information.
Connect the output from a pre-amplifier or processor, such as a
surround-sound decoder, to this set of inputs. Use a twin RCA-to-
RCA lead to connect to the left and right `Audio Output' of the pre-
amp or processor to the Fixed-In sockets.
NOTES:
Always turn the C270 and other components in the
system off before connecting or It is disconnecting anything to the
"Fixed In" or Variable In" sockets.
When using the Fixed In sockets, make sure the "Input Select"
switch (No.2) is to the "Fix" position.
2. INPUT SELECT
The Input Select switch determines which input on the C270 is
active. Set to "FIX" for use with "Fixed In" and to "VAR" for use
with "Variable In". Refer also to section "Variable In" in this
chapter for more information.
3. VARIABLE IN
Using the Variable inputs, it is possible to adjust the volume level
for both channels simultaneously, using the Input Level Control
(No. 4). This can be useful for:
· Level matching
In a surround sound or system with more than one set of
speakers, differences in levels can occur due to variances in
efficiency between these speakers. In case your preamplifier or
processor also has individual trims for each channel, set these
to neutral or mid position (usually marked as 0dB). Adjust the
Level Control so that the speakers driven by the C270 have the
correct volume level compared to the other speakers, judging
from your listening position.
· Extended volume control range
Many systems have so much voltage gain that the speakers (or
your ears) are overdriven at any volume control setting higher
than 11 or 12 o'clock. As a result you are confined to using only
the lower half of the volume control's range, where adjustments
are imprecise and where channel balance errors tend to be
greater. If the input level is reduced, you can turn up your
processor's or preamplifier's volume control, making more
effective use of its range. (Suggestion: adjust the input level
controls so that your preferred maximum sound levels usually
occur at about 2 or 3 o'clock on the volume control.) As an
added benefit, this procedure suppresses any noise produced
by the preamp's high level circuitry (e.g. any residual hum or
hiss that does not go away when the Volume is turned down).
· Bi-Amping
Some loudspeakers have separate connection terminals for the
LF (Low Frequency) and HF (High Frequency) sections of the
speaker. This facility allows to "Bi-Amp" such speakers, where
a separate power amplifier is used for the LF and HF section,
which may improve overall sound quality. When Bi-Amping with
different models of power amplifiers, it is likely to occur that one
power amplifier has more "gain" than the other, resulting in a
mis-match in level for the woofer and tweeter of the speaker.
Adjust the level control so that woofer and tweeter are in perfect
balance with each other (identical gain of power amplifiers).
Connect the output from a pre-amplifier or processor, such as a
surround-sound decoder, to this set of inputs. Use a twin RCA-to-
RCA lead to connect to the left and right `Audio Output' of the pre-
amp or processor to the Fixed-In sockets.
NOTES:
Always turn the C270 and other components in the
system off before connecting or disconnecting anything to the
"Fixed In" or Variable In" sockets.
When using the "Variable In" sockets, make sure the "input
Select" switch (No.2) is to the "VAR" position.
4. INPUT LEVEL CONTROL
The Input Level control works in combination with "Variable In"
(No. 3) only. With the control the volume to the power amplifier
can be adjusted from zero (counter clock-wise) to maximum
(turned up all the way clock-wise). Refer also to section "Variable
In" in this chapter for more information.
NOTE:
Always turn the C270 and other components in the system
off before connecting or disconnecting anything to the "Fixed In"
or Variable In" sockets.
GB
4
NAD C270 Stereo Power Amplifier
background image
5. SPEAKERS A & SPEAKERS B
The NAD C270 is equipped with two sets of speaker connectors
wired in parallel to facilitate connection of multiple pairs of
speakers or "Bi-Wiring". Use the Speakers A connectors for the
`main' speakers and use the Speakers B connectors for a second
pair, for example, extension speakers located in another room.
Under normal operation, connect the right speaker to the
terminals market `R +'
and `R-' ensuring that the `R+' is
connected to the `+' terminal on your loudspeaker and the `R-'
is connected to the loudspeaker's
`-' terminal. Connect the
terminals marked `L+' and `L-' to the left speaker in the same way.
In Bridge Mode, connect the single speaker to the terminals
marked `R +' and `L+' ensuring that the `L+' is connected to the
`+' terminal on your loudspeaker and the R+ is connected to the
loudspeaker's `-' terminal. Refer also to section "Bridge Mode" in
this chapter (No. 6).
Always use heavy duty (16 gauge; 1.5mm, or thicker) stranded wire
to connect loudspeakers to your NAD C270. The high-current binding
post terminals can be used as a screw terminal for cables terminating
in spade or pin sockets or for cables with bare wire ends.
BARE WIRES AND PIN CONNECTORS
Bare wires and pin sockets should be inserted into the hole in the
shaft of the terminal. Unscrew the speaker terminal's plastic
bushing until the hole in the screw shaft is revealed. Insert the pin
or bare cable end into the hole and secure the cable by tightening
down the terminal's bushing. Ensure bare wire from the speaker
cables does not touch the back panel or another socket . Ensure
that there is only 1/2" (1cm) of bare cable or pin and no loose
strands of speakers wire.
NOTE:
Make sure the speaker impedance is 4 ohms or more
when connecting only one pair of speakers; make sure the
speaker impedance for all speakers is over 8 ohms when
connecting two sets of speakers. In Bridge Mode, the impedance
of the loudspeaker should also be 8 ohms or higher.
Always turn the C270 and other components in the system off
before connecting or disconnecting speakers.
6. BRIDGE MODE
The stereo NAD C270 power amplifier can be configured to be
mono (Bridge Mode), more than doubling its output power: 2 x
120 vs. 1 x 300 Watt. This way, the NAD C270 can be used as part
of a high power stereo or home-theatre system, by connecting
adding additional power amplifiers.
Set the BRIDGE MODE switch to the "Bridge" position and
connect the speaker to the terminals marked `L +' and `R+'
ensuring that the `L+' is connected to the `+' terminal on your
loudspeaker and the `R+' is connected to the loudspeaker's `-'
terminal. Connect the source to the Left MAIN-IN input.
In Bridged Mode the NAD C270 will produce approximately 300W
into an 8 ohm loudspeaker. In this mode, the amplifier sections
will react as though the speaker impedance has been halved. Low
impedance speakers (under 8 ohms) are not recommended when
using Bridge Mode, as these may cause the amplifier's thermal
cut-out to operate if played at high levels.
The Bridge Mode indicator on the front panel (Fig. 2; No. 4) will
illuminate when the amplifier is in Bridge mode.
NOTES:
Do not connect anything to the Right "Fixed In" or Right
"Variable In" sockets when Bridge Mode is selected.
Always turn the C270 and other components in the system off
before connecting or disconnecting anything to the "Fixed In" or
Variable In" sockets.
7. SOFT CLIPPINGTM
When an amplifier is driven beyond its specified power output, a
hard, distorted sound can be heard on very loud sounds. This is
caused by the amplifier cutting off or `hard clipping' the peaks of
sound that it was not designed to reproduce. The NAD Soft
ClippingTM circuit gently limits the output of the system to
minimise audible distortion if the amplifier is overdriven.
If your listening involves moderate power levels you may leave the
Soft ClippingTM switch to Off. If you are likely to play at high levels,
that could stretch the amplifier's power capability, then switch Soft
ClippingTM On.
The Soft ClippingTM indicator on the front panel will illuminate
when the amplifier is in Soft Clip mode.
8. 12V TRIGGER AUTO ON-OFF
The C270's 12V trigger input allows it to be switched to On and
Stand-by remotely by an external component.
Set the 12V Trigger switch set to the "ON" position to activate the
12V Trigger input. When the switch is set to the Off position, the
12V trigger input is not active. Refer to section "12V Trigger In"
below for more information.
9. 12V TRIGGER IN
This input allows the C270 to be switched remotely to stand-by
and on or by ancillary equipment such as a preamp, AV processor,
etc. which are also equipped with a 12V trigger output.
For switching Stand-by/Power On of the C270 by an external
component, connect the12V-trigger input of the C270 to the
remote component's DC output jack. The plug required is a
standard 3.5mm Mini-Jack plug ("mono"): The tip is the live or
+ connection, the shaft of the input jack is the 12V-trigger - or
ground connection.
NOTES:
The C270's 12V Trigger will work within a range of 6 to
15 V DC level and typically draws less than 10mA of current.
Check the specifications of the Trigger output terminal on the
remote component to ensure it is compatible with the C270's 12V-
trigger input. NAD components equipped with 12V output triggers
are fully compatible with the C270's 12V input trigger.
Before making any connections to any 12V trigger input or output,
make sure all components are disconnected from the AC mains.
Failure to observe the above may result in damage to the C270 or
any ancillary components attached to it. If in doubt over the
connections, installation and operation of the 12V trigger output
consult your NAD dealer.
10. AC LINE CORD
Plug the AC power cord into a live AC wall socket. Make sure all
connections have been made before connecting to mains.
GB
5

Reviews

There are no reviews of this manual yet.