CLARION 28185 EB50A Service Manual

Cover page of CLARION 28185 EB50A Service Manual

Service Manual for CLARION 28185 EB50A, downloadable as a PDF file.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 36 pages
  • File size: 3.09 MB
  • Available language versions: English
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • the manual includes circuit diagrams,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
PN-2959N
- 1 -
Service Manual
Published by Service Dept.
Printed in Japan
Clarion Co., Ltd.
7-2, Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan
Service Dept.: 7-2, Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan
Tel: +81-48-601-3705 FAX: +81-48-601-3804
298-6533-00 Dec.2007
Model
NISSAN Automobile Genuine
6CD LW/MW/FM/RDS Bluetooth
Combination
PN-2959N-A
(Genuine No.28185 EB50A)
(ID No.CY15D)
SPECIFICATIONS
Radio section
Tuning system:
PLL Frequeency synthesizer sys-
tem
Receive range:
LW
153kHz to 279kHz
MW
531kHz to 1,602kHz
FM
87.5MHz to 108.0MHz
Intermediate frequency:
LW/MW/FM
10.7MHz
Quieting sensitivity:
LW
Less than 45dBu
(at 20dB S/N)
MW
Less than 37dBu
(at 20dB S/N)
FM
Less than 15dBu
(at 30dB S/N)
Separation:
FM
22+5/-7dB(1kHz)
S/N ratio:
LW
More than 40dB
MW
More than 40dB
FM
More than 50dB
Auto tuning stop sensitivity:
LW
47+6/-6dBu
(at 162/216/279kHz)
MW
47+6/-6dBu
(at 603/999/1404kHz)
FM
29+6/-6dBu
(at 87.9/98.1/107.9MHz)
CD section
Disc:
12cm disc
Separation:
More than 50dB
(1kHz, 20kHz L.P.F)
S/N ratio:
More than 80dB(JIS-A)
Distortion:
Less than 0.1%
(20kHz L.P.F)
General
Load impedance:
2kohm/4CH
Output voltage:
3.9Vrms
Power supply voltage: DC13.2V(10.8 to 15.6V)
Negative ground
Back-up consumption: Less than 0.5mA
Dimensions(mm):
182(W) x 104(H) x 163(D)
Weight:
2.3kg
NOTES
*
As for this model, the tuner of the DSP type is used.
When you exchange it due to the tuner pack(BL101;880-
2091M) trouble, it is necessary to adjust for S-meter etc.
Special JIG is necessary for an accurate adjustment. The
procedure document for the exclusive use jig is appended
to it.
*
This DSP IC SAF7730HV/N317(IC301) of Main PWB is
exposed die soldering pad type. It cannot remove in an
ordinary soldering iron.
Please use special removal JIG at the time of IC ex-
change
*
The
word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of suchmarks by
CLARION CO.,LTD. is under license.
*
We cannot supply PWB with component parts in prin-
ciple. When a circuit on PWB has failure, please repair it
by component parts base. Parts which are not mentioned
in service manual are not supplied.
*
Specifications and design are subject to change without
notice for further improvement.
COMPONENTS
1.
Main unit
----------
1
background image
PN-2959N
- 1 -
Service Manual
Published by Service Dept.
Printed in Japan
Clarion Co., Ltd.
7-2, Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan
Service Dept.: 7-2, Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan
Tel: +81-48-601-3705 FAX: +81-48-601-3804
298-6533-00 Dec.2007
Model
NISSAN Automobile Genuine
6CD LW/MW/FM/RDS Bluetooth
Combination
PN-2959N-A
(Genuine No.28185 EB50A)
(ID No.CY15D)
SPECIFICATIONS
Radio section
Tuning system:
PLL Frequeency synthesizer sys-
tem
Receive range:
LW
153kHz to 279kHz
MW
531kHz to 1,602kHz
FM
87.5MHz to 108.0MHz
Intermediate frequency:
LW/MW/FM
10.7MHz
Quieting sensitivity:
LW
Less than 45dBu
(at 20dB S/N)
MW
Less than 37dBu
(at 20dB S/N)
FM
Less than 15dBu
(at 30dB S/N)
Separation:
FM
22+5/-7dB(1kHz)
S/N ratio:
LW
More than 40dB
MW
More than 40dB
FM
More than 50dB
Auto tuning stop sensitivity:
LW
47+6/-6dBu
(at 162/216/279kHz)
MW
47+6/-6dBu
(at 603/999/1404kHz)
FM
29+6/-6dBu
(at 87.9/98.1/107.9MHz)
CD section
Disc:
12cm disc
Separation:
More than 50dB
(1kHz, 20kHz L.P.F)
S/N ratio:
More than 80dB(JIS-A)
Distortion:
Less than 0.1%
(20kHz L.P.F)
General
Load impedance:
2kohm/4CH
Output voltage:
3.9Vrms
Power supply voltage: DC13.2V(10.8 to 15.6V)
Negative ground
Back-up consumption: Less than 0.5mA
Dimensions(mm):
182(W) x 104(H) x 163(D)
Weight:
2.3kg
NOTES
*
As for this model, the tuner of the DSP type is used.
When you exchange it due to the tuner pack(BL101;880-
2091M) trouble, it is necessary to adjust for S-meter etc.
Special JIG is necessary for an accurate adjustment. The
procedure document for the exclusive use jig is appended
to it.
*
This DSP IC SAF7730HV/N317(IC301) of Main PWB is
exposed die soldering pad type. It cannot remove in an
ordinary soldering iron.
Please use special removal JIG at the time of IC ex-
change
*
The
word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of suchmarks by
CLARION CO.,LTD. is under license.
*
We cannot supply PWB with component parts in prin-
ciple. When a circuit on PWB has failure, please repair it
by component parts base. Parts which are not mentioned
in service manual are not supplied.
*
Specifications and design are subject to change without
notice for further improvement.
COMPONENTS
1.
Main unit
----------
1
background image
PN-2959N
- 2 -
To engineers in charge of repair or
inspection of our products.
Before repair or inspection, make sure to follow the
instructions so that customers and Engineers in charge
of repair or inspection can avoid suffering any risk or
injury.
1. Use specified parts.
The system uses parts with special safety features against fire
and voltage. Use only parts with equivalent characteristics
when replacing them.
The use of unspecified parts shall be regarded as remodeling
for which we shall not be liable. The onus of product liability
(PL) shall not be our responsibility in cases where an accident
or failure is as a result of unspecified parts being used.
2. Place the parts and wiring back in their original positions after
replacement or re-wiring.
For proper circuit construction, use of insulation tubes, bond-
ing, gaps to PWB, etc, is involved. The wiring connection and
routing to the PWB are specially planned using clamps to keep
away from heated and high voltage parts. Ensure that they are
placed back in their original positions after repair or inspec-
tion.
If extended damage is caused due to negligence during re-
pair, the legal responsibility shall be with the repairing com-
pany.
3. Check for safety after repair.
Check that the screws, parts and wires are put back securely
in their original position after repair. Ensure for safety reasons
there is no possibility of secondary ploblems around the re-
paired spots.
If extended damage is caused due to negligence of repair, the
legal responsibility shall be with the repairing company.
4. Caution in removal and making wiring connection to the parts
for the automobile.
Disconnect the battery terminal after turning the ignition key
off. If wrong wiring connections are made with the battery con-
nected, a short circuit and/or fire may occur. If extensive dam-
age is caused due to negligence of repair, the legal responsi-
bility shall be with the repairing company.
5. Cautions in soldering
Please do not spread liquid flux in soldering.
Please do not wash the soldering point after soldering.
6. Cautions in soldering for chip capacitors
Please solder the chip capacitors after pre-heating for replace-
ment because they are very weak to heat.
Please do not heat the chip capacitors with a soldering iron
directly.
7. Cautions in handling for chip parts.
Do not reuse removed chips even when no abnormality is ob-
served in their appearance. Always replace them with new
ones. (The chip parts include resistors, capacitors, diodes, tran-
sistors, etc).
Please make an operation test after replacement.
8. Cautions in handling flexible PWB
Before working with a soldering iron, make sure that the iron
tip temperature is around 270
. Take care not to apply the
iron tip repeatedly(more than three times)to the same patterns.
Also take care not to apply the tip with force.
9. Turn the unit OFF during disassembly and parts replacement.
Recheck all work before you apply power to the unit.
10. Cautions in checking that the optical pickup lights up.
The laser is focused on the disc reflection surface through the
lens of the optical pickup. When checking that the laser opti-
cal diode lights up, keep your eyes more than 30cms away
from the lens. Prolonged viewing of the laser within 30cms
may damage your eyesight.
11. Cautions in handling the optical pickup
The laser diode of the optical pickup can be damaged by elec-
trostatic charge caused by your clothes and body. Make sure
to avoid electrostatic charges on your clothes or body, or dis-
charge static electricity before handling the optical pickup.
11-1. Laser diode
The laser diode terminals are shorted for transportation in or-
der to prevent electrostatic damage. After replacement, open
the shorted circuit. When removing the pickup from the mecha-
nism, short the terminals by soldering them to prevent this
damage.
11-2. Actuator
The actuator has a powerful magnetic circuit. If a magnetic
material is put close to it. Its characteristics will change. En-
sure that no foreign substances enter through the ventilation
slots in the cover.
11-3. Cleaning the lens
Dust on the optical lens affects performance.
To clean the lens, apply a small amount of isopropyl alcohol to
lens paper and wipe the lens gently.
CAUTION
This appliance contains a laser system and is classified as
a "CLASS 1 LASER PRODUCT". To use this model prop-
erly, read this Owner's Manual carefully and keep this manual
for your future reference. In case of any trouble with this
player, please contact your nearest "AUTHORIZED service
station". To prevent direct exposure to the laser beam, do
not to open the enclosure.
NISSAN PART No.
N DE MODELE
MODEL NO.
TENSION D
UTILISATION 12V
AU CHASSIS
SERIAL No.
EMCTYPE
DESIGN NOTE No.
PART NO.
MADE IN
Clarion co., Ltd
Bluetooth ID
276-
background image
PN-2959N
- 3 -
TROUBLESHOOTING
No power
Check
B/U, ACC
OK
NG
Check
the display
Problem of
IC402, IC404, IC406, IC506
Confirm to
circuit line of B/U5V, ACC,
SYS5V
the voltage value of
IC507, Q519, Q520
Confirm to
the voltage value of
Q515 (Main PWB),
IC801 (Switch PWB)
NG
Check
the operating key
NG
Problem of IC801
OK
Power on
No sound radio
OK
OK
NG
Check
the operating key
Connection J502
Problem of IC801
NG
OK
OK
OK
Check
the waveform of
38,39,43,44pin
of IC301
Check
the display
Check
the voltage value of
TUNER8.5V/TUNER5V
Problem of Q109, IC104
NG
Check
the waveform of
16,17pin of BL101
Problem of BL101
NG
Problem of IC301
NG
OK
OK
Check
the waveform of
IC501
Problem of IC501
NG
Check
the waveform of
IC700, IC701
Problem of IC700, IC701
NG
Confirm to
the voltage value of
Q515 (Main PWB),
IC801 (Switch PWB)
OK
Power on
No sound CD
OK
OK
NG
Check
the operating key
Connection J502
Problem of IC801
NG
OK
OK
OK
Check
the waveform of
38,39,43,44pin of
IC301
Check
the display
Check
the voltage value of
CD9V / CD3.3V
Problem of IC204, IC205
NG
Check
the waveform of
8pin of J202
Problem of CD mech
NG
Problem of IC301
NG
OK
OK
Check
the waveform of
IC501
Problem of IC501
NG
Check
the waveform of
IC700, IC701
Problem of IC700, IC701
NG
Confirm to
the voltage value of
Q515 (Main PWB),
IC801 (Switch PWB)
background image
PN-2959N
- 4 -
Check
enter in a set screen
of the telephone
OK
OK
NG
Confirm to
connect Bluetooth
with the cellular phone again
Confirm to
IC901 (Bluetooth module)
IC302 (the power of 3.3V)
NG
Check
the link of Bluettoth steady
or
the BT mark on
NG
OK
The receiving talk voice
doesn't go out of the speaker.
OK
OK
NG
Check
the sound of
CD or radio
NG
Check
connect it with
the cellular phone
Confirm to
IC901 (Bluetooth module)
Check
the call sound come to send it
by telephone
Check
the power of IC901
(Bluetooth module)
OK
Confirm to
IC901 (Bluetooth module)
the circuit of
Q101,102,104,105,106,107,108
NG
Confirm to
IC901 (Bluetooth module)
the circuit of ANT902
OK
OK
OK
Check
the power of IC101
(CODEC)
Check
the power of IC901
(Bluetooth module)
Confirm to
the circuit of
IC302 (the power of 3.3V)
NG
NG
OK
OK
Check
the waveform of
9pin of IC101
NG
Check
the waveform of
43pin of IC402(DSP)
NG
OK
Confirm to
IC901 (Bluetooth module)
the circuit of
Q101,102,104,105,106,107,108
ANT902
Confirm to
IC402 (DSP), IC501 (AMP),
J502 (Connector)
Confirm to
the circuit of
IC302 (the power of 3.3V)
Confirm to
the circuit of
IC101 (CODEC)
IC901 (Bluetooth module)
Confirm to
the circuit of IC402 (DSP)
Confirm to
the output of J502
Check
how to connect by inquiry
from the cellular phone
The cellular phone and Bluetooth
cannot be connected.
background image
PN-2959N
- 5 -
OK
NG
Check
connect it with
the cellular phone
Check
the sound
in the mike test mode
OK
OK
OK
Check
the power of
IC103 (mic amp),
IC107(switch)
Check
the power voltage of
the mic(5.0V)
NG
NG
OK
OK
Check
the waveform of
1pin of IC103
NG
Check
the waveform of
1pin of IC107
NG
OK
OK
OK
OK
Check
the PCM signal waveform of
2pin of IC101
Check
the power of
IC101(CODEC)
NG
Check
the waveform of
14pin of IC101
NG
NG
OK
OK
Check
the power of
IC901 (Bluetooth module)
NG
Check
the sound from
the receiving talk signal
NG
Confirm to
the circuit of
IC901 (Bluetooth module)
Confirm to
the circuit of
Q220, TH201, Q219
Confirm to
the circuit of
IC302 (the power of 3.3V)
Confirm to
the circuit of IC103 (mic amp)
Confirm to
the circuit of IC103 (switch)
Confirm to
the circuit of
IC101 (CODEC)
IC302 (the power of 3.3V)
Confirm to
the circuit of IC101 (CODEC)
Confirm to
the circuit of
IC101 (CODEC)
IC901 (Bluetooth module)
Confirm to
the circuit of
IC302 (the power of 3.3V)
IC901 (Bluetooth module)
Confirm to
the output of J502
Confirm to
the circuit of
IC901 (Bluetooth module)
Confirm to
the telephone voice is heard
by the telephone on the far end side.
Not hear the telephone voice
by the telephone
on the far end side.

Reviews

There are no reviews of this manual yet.