AKAI MPC2000XL Owner's Manual

Cover page of AKAI MPC2000XL Owner's Manual

Owner's Manual for AKAI MPC2000XL, downloadable as a PDF file.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 209 pages
  • File size: 1.45 MB
  • Available language versions: English
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
MIDI PRODUCTION CENTER
mpc2000xl
background image
MIDI PRODUCTION CENTER
mpc2000xl
background image
The lightning flash with arrowhead symbol , within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure; that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intented to alert the user
to the presence of important operating and maintenance (servicing) instruc-
tions in the literature accompanying the appliance.
THE SYMBOLS ARE RULED BY UL STANDARDS (U.S.A.)
5B-En
WARNING!!
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
1-En
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
12 / 7 / 2001 Rev. 7
background image
Page i
Warning
WARNING: WHEN USING ELECTRIC PRODUCTS, BASIC PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
WARNING
The MPC2000XL is designed to be used in a standard household environment.
Power requirements for electrical equipment vary from area to area. Please ensure that
your MPC2000XL meets the power requirements in your area. If in doubt, consult a qualified
electrician or AKAI professional dealer.
120 VAC
@ 60 Hz for USA and Canada
220~240 VAC
@ 50 Hz for Europe
PROTECTING YOURSELF AND THE MPC2000XL
· Never touch the AC plug with wet hands.
· Always disconnect the MPC2000XL from the power supply by pulling on the plug, not the
cord.
· Allow only an AKAI professional dealer or qualified professional engineer to repair or
reassemble the MPC2000XL. Apart from voiding the warranty, unauthorized engineers
might touch live internal parts and receive a serious electrical shock. There are no
serviceable parts inside.
· Do not put, or allow anyone to put any object, especially metal objects, into the
MPC2000XL.
· Use only a household AC power supply. Never use a DC power supply.
· If water or any other liquid is spilled into or onto the MPC2000XL, disconnect the power,
and call your dealer.
· Make sure that the unit is well-ventilated, and away from direct sunlight.
· To avoid damage to internal circuitry, as well as the external finish, keep the MPC2000XL
away from sources of direct heat (stoves, radiators, etc.).
· Avoid using aerosol insecticides, etc. near the MPC2000XL. They may damage the
surface, and may ignite.
· Do not use denaturated alcohol, thinner or similar chemicals to clean the MPC2000XL.
They will damage the finish.
· Modification of this equipment is dangerous, and can result in the functions of the
MPC2000XL being impaired. Never attempt to modify the equipment in any way.
· Make sure that the MPC2000XL is always well-supported when in use (either in a
specially-designed equipment rack, or a firm level surface).
· In order to assure optimum performance of your MPC2000XL, select the setup location
carefully, and make sure the equipment is used properly. Avoid setting up the MPC2000XL
in the following locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface which is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
background image
Page ii
Warning
WARNING
THIS APPARATUS MUST BE EARTHED
IMPORTANT
This equipment is fitted with an approved non-rewireable UK mains plug.
To change the fuse in this type of plug proceed as follows:
1) Remove the fuse cover and old fuse.
2) Fit a new fuse which should be a BS1362 5 Amp A.S.T.A or BSI approved type.
3) Refit the fuse cover.
If the AC mains plug fitted to the lead supplied with this equipment is not suitable for your type of
AC outlet sockets, it should be changed to an AC mains lead, complete with moulded plug, to the
appropriate type. If this is not possible, the plug should be cut off and a correct one fitted to suit
the AC outlet. This should be fused at 5 Amps.
If a plug without a fuse is used, the fuse at the distribution board should NOT BE GREATER than 5
Amp.
PLEASE NOTE: THE SEVERED PLUG MUST BE DESTROYED TO AVOID A POSSIBLE
SHOCK HAZARD SHOULD IT BE INSERTED INTO A 13 AMP SOCKET
ELSEWHERE.
The wires in this mains lead are coloured in accordance with the following code:
GREEN and YELLOW --EARTH
BLUE
--NEUTRAL
BROWN
--LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as follows:
The wire which is coloured GREEN and YELLOW must be connected to the terminal which is
marked with the letter E or with the safety earth symbol
or coloured GREEN or coloured
GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with
the letter L or coloured RED.
THIS APPARATUS MUST BE EARTHED
Ensure that all the terminals are securely tightened and no loose strands of wire exist.
Before replacing the plug cover, make certain the cord grip is clamped over the outer sheath of
the lead and not simply over the wires.
6D-En
background image
Page iii
Warning
VENTILATION
Do not prevent the unit's ventilation, especially by placing the unit on the soft carpet, in a narrow space,
or by placing objects on the unit's chassis--top, side, or rear panels. Always keep the unit's chassis
at least 10 centimeters from any other objects.
31C-En
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROYED BY THE MANUFACTURER FOR
COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
32-En
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications.
27-En
COPYRIGHT NOTICE
The AKAI MPC2000XL is a computer-based device, and as such contains and uses software in
DISKs and ROMs. This software, and all related documentation, including this Operator's Manual,
contain proprietary information which is protected by copyright laws. All rights are reserved. No part
of the software or its documentation may be copied, transferred or modified. You may not modify,
adapt, translate, lease, distribute, resell for profit or create derivative works based on the software
and its related documentation or any part there of without prior written consent from AKAI
professional M.I. Corp., Yokohama, Japan.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
·
Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and receiver.
·
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
·
Consult the dealer or an experienced radio/TV technician for help.
21B-En
AVIS POUR LES ACHETEURS CANADIENS DU MPC2000XL
Le présent appareil numérique n'ément pas de bruits radioélectriques dépassant les limites applicables
aux appareils numériques de la Class B prescrites dans le Règlement sur le brouillage radioélectrique
édicté par le ministère des Communications du Canada.
27-F

Reviews

There are no reviews of this manual yet.